Windows Forum

Ask something
Discussion Locked

Network Drive Error

0 helpful
5 replies

by aamir_riaz999

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We've Windows NT Server 4.0 and Client Side we've 60 computers connected using Windows 95 & 98. On Client side there was a error occured.
"The device does not exist on the network read drive W."
'W' is our mapped network drive which disconnects many times. We are using 10/100 bst Hub and NICs. I need help.

5 replies

by woody h

You might want to check and make sure that your server has a 100 MB connection to the Hub. If it doesn't, you could be bottlenecking at the server which will cause the problem that you are seeing.

Woody

by ð

does it show you the share name for the W drive? I had a same problem with a NT machine with a J drive that has no share name and would not disconnect for nothing. when in command prompt, it saids it disconnects successfully but the drive still exist. I reapplied service pack and it fixed my problem.

This discussion is closed to new replies.