Discussion Locked

Network Logon Box Disappears

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Just when I was at the beach my boss got a hold of my cell number from someone and and called me of a weired problem.
" The Network Logon Screen" on his Dell P3 with Win98SE disappeared and will not automatically appear at the beginning of the Windows session. The only way to get it up on the screen is to hit Shutdown-Log On As a Different User and then it works. I'm stumped cuz I tried to do all the following:

1. I wiped out and restored network configuration (Client for MS, TCP/IP)
2. I removed all *.pwl files
3. I also deltree'd C:\windows and reinstalled Windows SE from from a saved copy of Dell cab folder in a c: directory.
4. I also replaced the 3com NIC with Intel Nic 10/100 just for sure.
5. I ran Norton Anti Virus 2000 many times with latest definitions for precautions.
6. I used TweakUI 98 tricks and can do .
7. I ran to Mcdonalds across the street 4 times for coffee in a six hour period.
8. I want to slit my wrist for bringing my cell phone at the beach on a beautiful Sunday af

14 replies

by arwjnplanotx

You may have already thought of this:
Try plugging into a different known good network connection. I've seen this problem when the network connection is not completely reliable.

Good luck,

Al

by fred_e944

Make sure (in the Network Properties from Control Panel or Network Neighborhood) that the Primary Network Logon is set for Client for Microsoft Networks.

by jkozura

I had this happen to me in conjunction with Netware 4.10 and a BayNetworks switch. The symptoms were basically the same as that you described. The cause was partly that I had upgraded to the Novell Client32 3.1, and partly that I had spanning tree protocol enabled on that port of the switch. I had to disable spanning tree for that port, then I got my bootup login back. This may help, or may not apply at all to you. Try to post a little more detail if possible. I gather that you are using the Client for MS, but not much about your hardware. Q: Is the nic and the device it is connecting to set for Nway autodetection? Has anything changed at all hardware wise?
John Kozura IV
IS Manager
AICPA/PDI

by pan 13 x

two things can be done. go to control panel and double click password enter the password for the windows log in and change the password to , exit the passord screen and go to network , if the microsoft windows login is there then change itto microsoft cleint for networks. this is for the pimary network login.

by otismungus

There is a microsoft article (Q152104)that tells how to PREVENT a logon prompt at startup (which I have employed on my home PC). If you reverse the instructions, you will enable the log on prompt. You will have to choose "Microsoft Network Client" in line 2, for example, instead of "Windows Logon",etc. Go to----http://support.microsoft.com/support/kb/articles/Q152/1/04.asp?LN=EN-US&SD=gn&FR=0

by otismungus

There is a microsoft article (Q152104)that tells how to PREVENT a logon prompt at startup (which I have employed on my home PC). If you reverse the instructions, you will enable the log on prompt. You will have to choose "Microsoft Network Client" in line 2, for example, instead of "Windows Logon",etc. Go to----http://support.microsoft.com/support/kb/articles/Q152/1/04.asp?LN=EN-US&SD=gn&FR=0

by jndureza

I solved it myself! I went to Registry and deleted the the Key = Autologon = (X) in thr the Local Machine\Windows\Network\currrent version. It worked! Thanks to all you folks who offred help.

This discussion is closed to new replies.