Question Locked

Network printing

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am installing a networked printer on a Windows server 2003 active directory network. I have a DHCP server running and i want to assign a static IP address to the printer so that it enables networked printing.

The printer will get the same IP address every time from the DHCP server if i reserve the ip address through its MAC address.

I don't know how to do that in Microsoft's DHCP server? Please advice

3 replies

by nimmo

Open the DHCP snapin>expand your server>right click reservations>new reservation>enter the name>IP address>units MAC address>Description>click add.

Make sure the printer is configured to obtain a IP address from a DHCP server.

If you arn't sure what the MAC address of the printer is most printer either have a menu structure to browse so you can print the confuguration or just hold down the start button and it should spit out the configuration page.

by animesh_joshi

Thanks for your advice, mate! I could read the MAC address from the instruction manual of the printer. Its working fine.

Nice to hear from someone in Australia. I'm located in Melbourne.

This discussion is closed to new replies.