Discussion Locked

network topology

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to map out a 100 node, 4 department LAN with Internet access, a print server, 8 printers, a firewall, mirror server and a ISDN to the home office

17 replies

by road-dog

Need more info, building layout, user concentration, preferred topology(ethernet assumed), ISP connection, number of app servers, equipment vendor....

You might want to rethink ISDN as SOHO transport, VPN might work better for cost and scalability.

by road-dog

Cliff, check your Email. I'm sending you the same sample drawing in .doc and .vsd formats.

RWA

by cliffordleighton

This is a computer fundamentals class optional project. As long as I can show 100 nodes in 4 departments with printers, Internet access and a connection to the home office I am good to go.

by Ryan Boudreaux140

If this is an existing network you can utilize a network viewing application to discover all the active nodes. Various software applications are out there that will do this from an administrative point of view. Most will list IP address, DNS name, open ports, SNMP information, and other data. Network View has a trial ware version available from CNet downloads that will accomplish this activity.

If this is a theoretical network, you can use software applications such as Visio to design a network diagram. Or there are other trial ware versions of software applications available that will allow you to design a network diagram.

by Former member

OK. SAy road-dog, what's VPN without a transport? Still need ISDN, Dialup, Cable modem or something to tunnel through...

Back to the question, what IS the question? U trying to get us to do your work?

by timwalsh

I'll just throw this out there because I would be interested in your answer.
Your course presumeably taught you all you need to know to design such a network. So are you looking for general suggestions, or are you looking for someone to do your project for you?

by jereg

It's your project and your credit, so I'm not going to do your work for you, but I'll say this:

You should rethink that one print server for 8 printers.

Good Luck.

by jereg

I'll also add this. Most of the info you're looking for can be found at switch vendors sites. You didn't mention switches, but I'm SURE you're going to be using them.

by shanghai sam

Lots of assumptions here you give little info

Let's start with the "core switch". Use one of the 3Com six port 10/100/1000 switches. You can stack two of the 3Coms together if you need to expand.

For the "distribution switches" I would purchase three 3Com 24-port 10/100 switches with a 1 Gbps uplink as well as one 3Com 48-port 10/100 switch and plug them into the core switch directly. Don't forget to add the printers...so you really need 108 ports.

You now need a Router: place it between the core switch and the Firewall. This will be your "south" connection - Firewall to Router to Private Network.

For the Firewall purchase something like a Cisco PIX. You will need three interfaces.

Now you need another router: for Internet connection. This will be your "north" connection - Firewall to Router to Public Network.

Now, on the third interface (PIX) you have a DMZ. Attach a switch to this interface. To the switch you would put your mailserver, your webserver and your "Public" nameserver. Maybe here your mirror server, too....

Create two DCs running on WIN2000 Server. Use WIN2000 Pro on the clients

That should do it....you should know this from your classes...it is always good to get some other input...BTW, you need to decide if you are going to use "Split-Brain" DNS or "internal" mydomain.local or something like that and then "external" mydomain.com...

Cary

This discussion is closed to new replies.