Discussion Locked

networking

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am doing a network job for a client,and they have two different connections but they want to stup the copier to print from both connections,and the connections cant be joined.how would i split that connection.

5 replies

by hal 9000

What exactly do you mean by

[i] two different connections[/i]

Different as in 2 RJ45 or different as in one RJ45 and a BNC?

If you want to get decent answers to your questions you need to provide some more detail so we can help you.

Do they want to convert from a BNC to RJ45 connector/Socket or what?

Col

by deepsand

Being a technical problem in search of a solution, this should properly be posted under "Ask a Question," rather than "Start a Discussion." You're likely to get more and better responses in the "Question" forum, as that's where people look for such.

by jdclyde

What you have said only has two possible resolution, based on if I understand you correctly.

Either get a router that brings both networks together or get a second copier. Period.

"cant be joined" or won't be joined? tell them two things that "can't be joined" can't share the same devices.

by hal 9000

Establish a Trust between the 2 networks and connect the device through a Hub/Managed Switch or whatever and share it that way.

Col

This discussion is closed to new replies.