Discussion Locked

Networking

0 helpful
25 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a PC which when configured to be on the network, at times works while at other times, it just does not work.

When it works, it only lasts for a short while, say two hours, then loses the settings.

What could be the problem? The network card is working properly.

25 replies

by chidimark

Are u sure that there is no problem with the network card???? i would suggest you to 'ensure that it is working fine on the other machine' too.
Remove this network card from the pc troublin u and place it on the other machine in the network and just notice if it behaves in the same way..

by chidimark

Are u sure that there is no problem with the network card???? i would suggest you to 'ensure that it is working fine on the other machine' too.
Remove this network card from the pc troublin u and place it on the other machine in the network and just notice if it behaves in the same way..

by chidimark

Are u sure that there is no problem with the network card???? i would suggest you to 'ensure that it is working fine on the other machine' too.
Remove this network card from the pc troublin u and place it on the other machine in the network and just notice if it behaves in the same way..

by jedimaster2003

Things you could do;
1. Replace the NIC (as a test for one day), and see if that makes any difference.
2. If NIC is fine, then you might want to look at the switch or hub for a bad network port.
3. If Ports are fine, then do a Ping -t (from a command prompt), to the server, or another computer on the network, the -t will ping until you type in Control-C to stop the pinging, this will tell you if you have lost your network connectivity.
4. Other things to look at would be; Bottlenecks @ a switch or hub, loose wire connection, maybe wires that have been crimpted by accident etc......

by timthetoolman

Hi,

No points... but I just want to second the first answer. Many times on TechRepublic people dont want to blame their nic for wierd behaviour because it works some of the time but in the end they replace the nic and its all hunkydory.

Cheers,
Tim.

by otl

Seems like you are not saving the settings and rebooting then verifying they are still the way you set them. Depending on OS you may not have the required permission to change the settings.

by jose mir

If you are 100% sure that the network card is ok, at least reinstall the card driver (download a new one form the manufacturer's web site).
You could interchange network cards between that PC and any other, and sit and watch !
Anyway, NICs are cheap, you should buy a new one. This is a previous step to formating the hard drive and installing the OS again.

Jose P. Mir
jpm@jpmir.net

by gigelul

Hello,
You only want to see our opinion?
Rate the answers or give us more detail!

by gigelul

You can reject an answer and post a comment with the results of your tests. In this manner the area of the possible answers will be reduced.

by le.huey

When you think that your NIC is not working... try pinging 127.0.0.1 to see if there's any respond if there isn't than you'll know that it's the card itself, but if there is a repond than try pinging the gateway... to see whether the gateway is having problem responding...

This is to isolate where the problem is...

Huey

by mwalec

Thanks for the various possible answers. I am persuing a number of options. Once successful I will let you know.

... sorry, I do not know how to rate the possible answers.

by mwalec

Please I do appreciate the possible answers that have been put accross. However, my problem has not been resolved yet. I should mention that I have tried three other cards, which work else where but cannot work on this PC.

by rrangel

If you are using Win XP and the NIC is OK, You can try this (it works for me), disable the wake-on-lan feature in the BIOS if your NIC doesn't support it, and "voila" the problem is gone.
Good Luck.

This discussion is closed to new replies.