Discussion Locked

Networking

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How I can network my two computers w/out hub, just by using a crossover cable. I have the networkcards already installed, I just need the steps to name,hook and share both computers. Tx Jaime Gordillo

5 replies

by stillatit

1. Make a cross-over cable, using category 5 wire and RJ-45 connectors. You will need a crimp tool to attach the connectors.

You can find pretty pictures of the connectors and pin-outs at
http://www.rich.tassie.net.au/ntstuff/cable.html
(remove any spaces from the url.)

A good electronics store should have some standard lengths of pre-made X cables available if you want to avoid making the cable yourself. If you can find one, it is probably cheaper than buying the parts and the tool if you are only planning to make one cable.

2. On each computer, install the drivers for the network cards if you have not already done so.

3. On each computer, install Client for Microsoft Networking, and turn on File and Print Sharing. (This will install the netbeui protocol if it is not already installed. For two computers, this is all you need.)

4. Give each computer a unique name. Right-click Network Neighborhood, select properties, then the Identification tab and fill in a name. Keep the names to under 15 characters, letters and numbers only.

5. On each computer, share the drive(s) and/or directories you wish the other computer to access. In Windows Explorer, for each item to be shared, right-click the drive or directory, select Sharing, turn on sharing, assign a name, and optionally specify a password. (If you will have both machines under your control, it may be easiest to just share the drives.)

6. You should now be able to see both computers in Network Neighborhood (double-click it) (My Network Places on Win2K) on each computer. To map a drive on another computer to a drive letter on your computer, right-click on Network Neighborhood, select Map Network Drive, pick a drive letter, and browse for the computer and share.

Good luck.

by guy west

The first answer sounds good but I believe you need also to make sure both computers are in the same workgroup - any name you choose for your workgroup should be the same in the properties of network neighborhood.

This discussion is closed to new replies.