4 replies
by acelogan
How do you want to hook it up? What are you trying to do? File Sharing? Printer Sharing? Modem Sharing? In my opinion, you should use TCP/IP on both systems. Assign each one an IP address of 192.168.1.x netmask of 255.255.255.0, disable DNS and DHCPand they should work.
Rick
by mganz_911
1 Check to see if your server is using a DHCP server to assign address to work stations
2 If not than you need to check what IP and submask address you are using
3 install tcp/ip and give address or use the DHCP server
4 make an account on the server to log and give permissions for the account
5 Than you can shared a printer moden or what ever
Good Luck
Mike
IF you are dealing with a small,local network
where everything is connected using coax
w/terminators or a hub you may want to use
NETBEUI (a fast,small albeit non-routable)
protocol otherwise consider the TCP/IP
option. You will need to log onto the '98 PC
as the Administrator or someone else that can
add a workstation to the Domain, unless you
are just using a Workgroup in which case you
just give the same Workgroup name to the 98
PC in Networking properties. Make sure that
the person using the 98 pc has a user account
in the NT Domain. also need to add the user
to whatever shares they'll need, as mentioned
on other previous posting....... If you could
give some more specifics we could give you
better/Tailored suggestions... GL and keep on
plugging!!!!
by petr.steiner
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending