Discussion Locked

Networking Question

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to be able to have my laptop users log onto a domain while they are in the office, but when small groups go to the same client I need them to be able to have access to each other's laptops as well as share a single printer. My thought was topurchase a 5 port hub and by using hardware profiles, configure a profile to use while at the office and another to use while at a clients'. However the network settings will not stay with any one profile. In other words, when I change the networksettings to reflect logging onto the domain at work, the network settings for the Clients' profile also changes. Does anyone know of a workaround for this? We need to be able to use the same NIC for each scenario.
Thanks,
Dana Wanner

12 replies

by calves

Hello Dana,

On the Network Neighborhood properties, you can leave the name of the network blank (only mark the logon to domain without giving it a name), so when the machine boots, will require the user to enter the username, password and domain.This way you should be able to logon to multiple domains with the same OS. I suggest that on each domain your clients use a different username tough. It will allow for the profile of each domain and user to stay.
Good luck and contact me if you have any questions!

by mark.tassin

I remember having to do this a while ago for project engineers in a construction company. The product we used was a utility called netswitcher.
http://www.netswitcher.com/

It allows you to save multiple profiles for network settings and switch between them.

by danawanner

Thanks for your help. I ended up talking with Microsoft about this and the only solution they had was a 3rd party utility. The one you suggested worked nicely.

by mphoffar

There's not really an easy way to do this.

A Couple of ways I can think of to do this. One would be to change the IPs on the laptops to something for internal use (192.168.X.X or 90.0.X.X), when they're in the office have them use a proxy server of some time to use a name server to get them on the network. When they're at a client, because they're using internal use IPs, they should be able to see each other with a hub.

The other way would be use NetBEUI to talk to each other and have them print that way also.

Good luck to you

Mark

by Former member

I've heard that netswitcher is good for this.

You could try and make your Windows logon the primary logon (Logon to windows first, then domain, this way they can escape the domain logon when not attached), have them all in the same workgroup (this should never change), buy a small hub, load netbuei in addition to your current protocol. It should work even w/o netswitcher!

by mike w.

Although it may get confusing for the users, Giving them a different logon name for each domain is your best answer.

by djake

You could make a laptop domain with Windows 2000 or NT 4 server installed on one of your laptops, and then you can either change your DHCP scope on the fly, while making sure that it only responds to the MAC addresses of your laptops or put two NICsin the main laptop and make it a proxy server. As a side note, if you are using PC card NICs, I've noticed that if you move the PC card from one slot to another (assuming you have two) it registers as a new card. That may be a Win98SE bug though, I don't know. Hope this helps.

This discussion is closed to new replies.