8 replies
by hank73
by jerryat187
There may be three solutions:
1. IF the system is out of the box use your
warranty.
2. If you put the system together check the
jumpers settings CLOSELY.
3. The chipset could be a problem, There's a
known problem RAM limitatio problem with
some chipsets and you could have bad RAM
or your Dimms/Simms/Cache could just need
to be reseated. Also check your bios to
make sure your RAM size is correctly set.
by jerryat187
by lavdasg
by jerryat187
by 1zzy
Depends on a few things going on in your system. One, if you are able to get to the OS most likely it is not hardware but software. Some real quik fixes for software based lock ups are as follows.
1.) Goto MSCONFIG and shut the config.sys, autoexec.bat, win.ini. and the startup group items off by clicking on Selective startup then unchecking them. (This will of course shut everything down on your system such as printers, dos drivers, and any programs running in the background.) REBOOT THE SYSTEM
2.) Check the Config.sys and the Autoexec.bat by clicking on the Tabs at the top and look to see what is loading before the OS starts up. This will tell you what DOS drivers are being installed (Such as soundblasters DOS sound driver).
3.) Work with the system like this for an hour or so and see how it runs. No Lock ups add back the Win.ini files by putting the check mark back in. Continue this way, followed by replacing the check marks for Config.sys, and then Autoexec.bat... (Consecutively of course.
by jerryat187
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending