These are the only two options I could find, but I still don't know how the system is going to reboot after the system is shut down. Only thing I can thing of is to have the system shutdown to the "It's not safe to shutdown the PC" and the UPS will cut and restore the power once the power comes back on.
Any other ideas??
Power Button
(Enabled default)
Turns system's power off and on.
If you turn off the system using the power button and the system is running an ACPI-compliant operating system, the system can perform an orderly shutdown before power is turned off.
If the system is not running an ACPI-compliant operating system, power is turned off immediately after the power button is pressed.
The button is enabled in the System Setup program. When disabled, the button can only turn on system power.
AC Power Recovery
(Last default)
Determines how the system reacts when power is restored to the system. If system is set to Last, the system returns to the last power state. On turns on the system after power is restored. When set to Off, the system remains off after power is restored.