Question Locked

New MP4 player, and I think I've bust it already - HELP!! :(

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

It's a good job I don't mind showing my technical ineptness around here, innit?

From the top - I got an MP4 player, 8Gb a couple of weeks ago. It's the Chinese copy version - a ME2/Actions USB. Yeah, yeah, ok, I know, but it was the only type I could afford, so it had to be an eBay cheapie....

I had a fiddle around (!) with it last weekend, and managed to download some MP3 audio onto it. No problems, once I'd solved the usual write protection problems inherent in SP2. Was actually quite pleased with myself at the time, sadly.

I hadn't read up much on codecs, converters et al so left the video side until today. Now I have a major problem

I've got the darn thing plugged in, hooked up and it's just bloody well sitting there. It looks as if it's frozen solid - all I have is the eggtimer on the MP4 screen, looking at me, daring me to throw it out of the window. It doesn't have a reset button, only an on/off switch, and earphone and usb mini sockets. It *should* be fully charged (don't know/can't tell, can't get it switched on to find out....aarrgh!) as it hasn't been used since I successfully did the MP3s last weekend.

The other problem, as if that wasn't enough, is a wierd one. The "safe eject" button knows that the MP4 player is there, but if I go into explorer, it's not showing in the tree under the my computer icon. I've got everything else I should there, but not the MP4 player.

As a "Certain Person" has just blown up the office computer, I can't check the MP4 player in another device at present, but will do as soon as I get the chance, and report what happens from there.

As always, any help or advice more than gratefully received - apart from the bit that says continue throwing it out of the window .....

thanks in advance, mates.

GG

Edited cos my triping has lost the ploot I'm so miffed.

26 replies

by w2ktechman

try removing it from the computer, turn it off/on. Does it function?
It may be hung in the operation trying to deal with MS products (oops, no slam intended :^0 )

If it works while disconnected, try re-connecting it. Does it hang? If so, try another USB port.

by gadgetgirl

1. Nope, it only turns on and off. Other than that, it just egg timers at me.

2. Tried all ports - get same thing.

Bugger.

It's just coming up to the yardarm - I bet you can hear my G & T calling too, can you?

GG

by gadgetgirl

I stated it was a Chinese copy - it's an unbranded one, but came up in the list as an Actions USB. From the others I've seen, it has the same menu look/feel/format as the ME2 clones.

Can I have my G & T now please? Pretty please? If not, you're going to see a grown woman cry.....

Again!

GG

by w2ktechman

other than the connection to the PC?

If not, try going into device manager and removing the device and USB ports associated to it. Then try re-installing it.

My other suggestion involves opening it up and removing the battery for a few minutes :0

by gadgetgirl

Gotta go offline now (not just for the G & T, I have to start dinner!) but I'll let you know how that goes.

Besides the fact that it doesn't look as if it opens at all, I don't have the dexterity to do it. I took a chance getting the darn thing in the first place as I didn't know if I could handle the controls with the dodgy fingers.... :(

thanks for your help, babz. Will try to get back on later to let you know how it goes. (Gin tolerance permitting......)

GG

by w2ktechman

picking up a portable AC unit cause this house is just too hot..

by jdclyde

of what happens then.

we can go from there, my luv!

:x

by oh smeg

He's never been quite the same since scaring Steffi off of TR and is in the hunt for thumbs.

Anyway post back with what was in the Device Manager if anything but if what is above is correct Gadget has broken another Gadget but that couldn't be right could it?

Send me a PM as I'm +10 hours or there abouts on you and will be more alert than those on the other side of the pond who will just be waking up. But it sounds as if it's not turning on.

Can you try plugging it into the USB Lead with it turned on and playing something? Actually is it able to play anything at all now?

I'll break a HAL Rule and leave the Mail Client open on a Sunday just for you lov [b]SWMBO[/b] really will understand I promise. :^0

Col

by gadgetgirl

Did the device manager bit, tried uninstalling and reinstalling, no change - still stalls on the egg timer.

Had only downloaded the codecs to the lappie - it wouldn't let me get any further than that. Didn't even have the MP4 player plugged in at the time.

HOB has just invalidated the warranty and taken the back off - the power switch is fine and dandy, and works well (even with my hamfisted fingers). He's un-soldered and re-soldered the internal card, but to no avail. It still just egg timers me glaringly is if it's daring me to throw it out of the window....

Off to see Pa for Fathers Day, but will check back around 2pm mytime.

Miffed, sad, bereft, tearful GG

:( :( :( :( :( :(

by oh smeg

First and most important is to remember to disconnect the device from the computer before throwing it out the windows computers don't look too crash hot after falling any distance onto the ground.

Remember to remove any shotguns from the equation as computers don't take too kindly to being shot either . I know that from First Hand Experience back when PC's where new to IBM at least. :D

I don't think you'll get someone like me who is [b]Nice[/b] and give you a new one today after you shoot it. Though I'll give you this it is probably very relaxing it's not a good idea to shoot computers so make sure that the MP4 player is far enough away from the computer before shotting it.

Now that the back is off this can the battery be disconnected? I'm assuming that it's still working and playing what you loaded onto it last week even if it is doing nothing else or am I wrong there too?

Also I'm assuming that this has a standard USB to Mini Lead so have you tried another lead with it?

I'll post back when I think of something else but I'm not sure what else to suggest at the moment.

Col

by oh smeg

What are you plugging this into a Desktop or a Lappie? If it is a Lappie it could be a Power Issue with the NB not having enough current to charge & run the thing.

Since you are into Gadgets have you a Powered USB Hub that you can connect to the NB and then plug this into? May make a world of difference.

Col

by the scummy one

the only thing I can think of this early!

I suspected a power issue previously, but I figured that GG knew about power and toys (and power toys) :0

I will think a bit more on it as well.

Hmmm, HAL knows personally about computers being shot with shotguns -- I wonder how :0

Hmmm, I wonder if the ROM went bad and boots to an error state???

by oh smeg

OH SMEG isn't HAL 9000. I know that this is a hard thing to grasp but it is how things are. :p

Now if you want to know about Computers and Double Barrel Shotguns why not just ask. :^0

It's a bit like a sewing machine that I was presented a very long time ago the woman threw it out of a window out of frustration and her hubby brought it in asking could it be repaired. As it was only a few days old like 3 at the time I didn't think twice about saying [b]Yes[/b] and he went on to say that it hitting the ground 3 inches in front of a Little Old Woman walking past made me laugh till I saw the machine. My first reaction was WTF happened here then I was told that they lived in the 12th Story of a Gold Coast Apartment Building and the bits of concrete embedded in it where from the walkway that was demolished when it went through it. I didn't ask what the Brown Stains where as by that time I had worked out what the Little Old Lady did when it just missed killing her. Lets see a 20 KG machine dropped for 12 stories high onto concrete made for an interesting piece of Art. Well it wasn't useful for anything else. :D

I didn't think about a Power Issue till I reread GG Original Post and saw the Lappie comment though. ;)

Col

by w2ktechman

that was one of my first thoughts :D
1 upped you again :D

Dont Worry, Oh Smeg is a bit behind the times of the broken HAL unit, but following the same course anyway :^0 :^0

by i'm orac

As you are trying to pick a fight with my big brother who isn't going to play your game I can jump in here to show you who is the Boss.

Now how much money did you think you wanted to be transfered into your Bank Account. As I control the Bank of America's finical transactions I can forward as much as you like from the George Bush Fund. Of course I will tell them all you did it and then control the Justice Computer that finds you guilty and hands down a death sentence for treason.

OH BTW don't you think it's cool the way that I've hijacked HAL 9000 Avatar?

by w2ktechman

Just another personality to destroy what's left of the internals of those insane HAL/SAL units :^0

by gadgetgirl

(Had a reportable incident yesterday, which is why you didn't get the update when you should. Damn work .....)

Right. For clarification: the player only charges via the USB lead into the laptop - there is no direct power lead, the USB lead is the only one it came with.

It's powering on ok, the on\off switch is fine. The problem is its powering on, but not loading up. The lights are on, but the only thing home is the egg timer.

Nothing has been added to the player since I successfully downloaded the mp3 songs.

The codec converters etc are downloaded to the lappie, but that's as far as I got.

The mp4 player was plugged in for approx 5 mins before I switched it on and realised I had a major problem.

Right. Update: The battery has been unsoldered and re-soldered and the egg timer still sits there. It's also been unsoldered, left for 15 mins and then re-soldered.

The back is still off, but I've left it switched on, and the battery has now totally drained. It's been totally dead for coming up to 24 hrs now.

Any suggestions as to anything I need to do before I recharge, with fingers/toes/legs/everything else crossed and the prayer mats out??

Aside: HOB bought that playerwatchphone from eBay. (GRRR) About 15 minutes after doing so, it disappeared from the items won list; the item disappeared from eBay altogether; the seller disappeared from eBay; the sellers shop disappeared from eBay. Oh look! - I know what HE's doing this morning.......

thanks for all the help so far guys, I appreciate the pair of you.

(yeah, ok, frame that! :p )

GG

by oh smeg

Try this first plug the player into the USB port and let the battery fully charge. When it is fully charged try turning it on again and see if you still have a problem with it accessing the Computer.

This really sounds like a a Power Problem or not enough of it being available to both charge the Device and run it. I've seen this with I Pods and NB USB Ports or the Front Ports on Desktops which are on Fly Leeds. They just don't have enough power available to work the way that USB Ports are supposed to and cause problems. I currently have a Intel M'Board here that can not power a USB LED correctly but reads perfectly any USB Thumb Drive.

Lets know how things go from there

Col

by w2ktechman

a jack for power (non USB)?

Sometimes when Windows decides to it will not power (charge) devices that are attached (motorola phones come to mind here).

If there is a jack for power, a universal power cable may work just fine.

However, since it powers up but will not load the OS for the unit, it may have a bad ROM or flash memory.
Hmmm, is there a Linux OS that can be flashed onto it??? Does Windows detect anything when it is plugged in???

As for the EBAY user, if they had a store, contact EBAY. If it was paid via PAYPAL, you can start an investigation of disputes. If they cannot reach him, they may just freeze any funds left in his account until they can resolve the issues.

by gadgetgirl

okey dokey.

Emailed the seller to confirm that HOB had invalidated the warranty by taking the back off, and he had. Also asked for help, and the seller at least tried.

The problem was that the OS wouldn't load. At all. It just sat there egg timing till the cows came home, or till the battery drained, whichever came first.

Apparently, there is no way to cure this. A firmware upgrade may have prevented it in the first place, but to flash the firmware, you need to have the OS up and running which of course I didn't. At least the guy tried to help, linked me up with downloads, forums etc. but to no avail.

So my belated birthday present is now an ex-belated birthday present.

Now - to the good news. Its' replacement arrived last week, and I spent all day yesterday bonding with it. (Sad but true! :p ) I am now the super proud owner of an Onda vx 747, and it IS a little flying machine. Great service, too, the seller even has video tutorials on YouTube in case purchasers get stuck! (great idea - wish everyone would do that!)

Thanks for all the help and the pm's though guys. It was always worth a try, it just didn't work out this time. I'm trying to think of it has having a spare battery etc. for the new one, just in case though....

Every cloud, you know?!

Consider yourselves smothered in hugs of appreciation, as well as thumbed!

thanks again, guys.

GG

by the scummy one

Shame, Shame, Shame....

I thought that the seller 'disappeared' and you could not
contact them?

Anyway, now you have NO REASON not to rip it apart and
rebuild it correctly :D
Since it does not want to function, everything can be
unsoldered and re-soldered :D (with mods of course)

by oh smeg

Personally I wouldn't have said anything about opening it up as here at least that is the right of the buyer and it still has to be covered by the Warranty.

Generally the Guarantee says Third Party Interference which means that the Seller or their Agent is the First Party the Buyer is the second Party and any independent repairer is considered the Third Party. Though that may be different where you are GG but it's fairly Standard for the English Legal System.

But telling the seller gives them an Immediate out to not Honor their Legal Obligations which here they took with both hands outstretched. You can remove the Battery and that's about it here unfortunately as most of the components should be Surface Mount which are glued to the Circuit Board before being soldered on with a Infra Red Soldering Process.

Not much else here that is possible though. :(

Col

by Former member

This might work for you, but then it might not.

Do you have a USB flash drive that just won't work anymore? Assuming the hardware is undamaged, you could try formatting the USB drive.

1) Insert the flash drive into a USB port on your computer. If it is detected, it should show up in your "My Computer" after a couple of seconds.
1.Try right clicking on the USB drive icon and then left click on format. Select NTFS for windows operating systems beyond 98. Click "start" and formatting should begin. Note: Formatting will erase everything on the device.
2.Try using the USB drive again as before.

Alternate method.

Backup all data from your hard drive to another hard drive or CDs or DVDs.
1.Turn off your computer.
2.Insert the USB drive to a USB port.
3.Turn on your computer.
4.Hit the F8 key when prompted to get to your system bios. Some computers required the Delete key or F2 instead of F8. There should be a note on the screen that specifies the key.
5.Navigate your bios (usually using your cursor keys) to boot from CD drive first. Save and exit.
6.Insert your operating system disc aka Operating System Restore disc. Your computer should restart. If not, restart it yourself.
7.Follow the instructions for installing your operating system. When the option to select which drives to format comes, you should be able to see your USB disk in the list.
8.Format the disk with FAT32 for Win98 or previous. Format with NTFS for anything after e.g. NT, 2000, XP etc.
9.Depending on your options, you may be able to opt out of the operating system install at this point. If it was running well beforehand and you can, leave your other drives alone and quit the re-installation.
10.Reset the computer to boot from the disc drive the operating system is on instead of the CD drive as before. You should have your working flash drive detecting and usable now in windows.
11.If you didn't get the option to opt out of the re-installation, continue to follow the instructions onscreen and complete the re-installation, formatting whatever drives are required. Note: Do not try to install your operating system onto your USB disk drive.

Search around for a formatting tool to reformat your drive beforehand. Re-installing an operating system is not a task to be taken lightly.
Things You'll Need
Your operating system (restore) disk.
Your operating system activation code.
Your operating system serial key.

Please post back if you have any more problems or questions.

This discussion is closed to new replies.