8 replies
by bowieb
The strange IP address you saw is an indication that it did not receive an answer from a DHCP server when it started up. This seems to indicate that the system is not connected to the network properly. If DHCP is failing, then the problem is at a lower level than IP.
Check your cable connections and make sure that you are connected to the right hub or switch. Is the LAN card set for the right speed? Are there any routers, switches, bridges, or other equipment between this workstation andthe DHCP server? Is everything configured to work through them?
by mikewbc
by mshavrov
Try to determin it's really NIC problem. Replace it with another one and see if it solve this problem. It may be broken NIC. When you plug it to LAN see if it has all required LED on or blinking. If this card was used somewhere else see in DHCP server it is not listed in any "hardcoded" definitions. If you have time and wish to do it you can try to use LAN Monitor to see packets with this MAC address traveling in network. And way to clear all settings is uninstall driver for this card, move it to another slot and install drivers again.
Good luck.
by mikewbc
by cavedweller
by mikewbc
by mikewbc
by mikewbc
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending