3 replies
by josh
by 3xp3rt
Is no problem with your HDD. The problem is your video card or monitor video cable connection.
If your monitor is connected to your computer and the cable is plugged right, after power off, push firmly the video card in his slot. Probably when you installed the new HDD, you moved accidentally the video card and no 100% contact there.
by otl
If PC appears to boot up normally (no strange beeps) would appear to be the cable to the monitor or video card output.
May want to check the cable from the monitor to the PC (fully plugged in and screwed down). You had to move the PC to install the HD, cable could have pulled loose. Some monitors have connectors for the cable on the back of them, if so make sure it is seated / screwed down also. OOPS, see you tried a different monitor, appears next answer is what you truly need.
Of course you could have been visited by Murphy's Law, first law - Anything that can go wrong will ! Output from the video card failed when you opened the case. If you have a spare card you could try it, if it works will need to download the updated drivers for it or buy a new video card.
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending