33 replies
by cricket1001 Accepted solution
by shasca Accepted solution
What aspects of repair are you already familiar with?
What do you feel are your strong points?
What are your intended aspirations you want to accomplish?
If you want to start at ground level, the attached training org. and course at the top of the list is the best place to begin.
by ron k. Accepted solution
COMPTIA A+ Certifications are just a piece of paper. Nice to have on a business card but they don't prove anything.
Get a computer or 2 or a dozen and take a few apart or better yet, put new components in them. Upgrade them as far as they'll go.
Network them through a router, a switch and wirelessly.
Install XP Pro, Windows Vista Ultimate and Windows 7 on various hardware. Do it a dozen times for each and you'll eventually remember to have all of the drivers before you install them, :^0 Maybe.
Working on computers isn't the same as working on VCRs used to be. It is and it isn't. For one thing VCRs used to cost hundreds of dollars. That was a good time to have a side-job fixing them. Now VCR tape players are cheap. People don't fix them, they throw them away. Computers are almost a throw away commodity for many home users.
VCR's were a cinch to fix too. Computers can be a PITA to fix. Anyone should be able to install an operating system but what are you going to do if there's valuable (priceless :D) data that MUST be saved? Learn how to save it.
I have roughly fifty-grand's worth of hoohaa on my computer. Unless I had backups, which I do, formatting and reinstalling an OS wouldn't be an option. You need to know better than to simply say, "I have to reinstall the OS."
I don't know how it is where you are but around here there are 8 brick and mortar computer repair shops on the main street and this is a small town. Everyone and their uncle is into computer repair. It's like having a lawn service around here. You have to mow for the rock bottom dollar or you're not going to get any business. Even if you do get business you'll be eating PB&J sandwiches for lunch instead of dining at Red Lobster.
My advice is to buy a used boat and go fishing a lot. At the end of the first year you'll probably be money ahead of where you'd be if you just now start learning how to fix computers.
I have zero overhead and a smidgin of knowledge but there is NO WAY I want to fix computers for a living. Everybody seems to want something for nothing. I'd rather fish.
You're not retired if you're having to work. I'm retired. I'm 53 and haven't worked for the past four and a half years. I don't miss it a bit.
by santeewelding Accepted solution
by oh smeg Accepted solution
After all Irate Domestic Customers are Nasty so I try to avoid them whenever possible. ;)
I did try retiring and then only work part time but things didn't turn out that way I'm now working harder to support the Bank's, My Staff, The Companies who supply the Cars Servicing, The Office Supply Companies and God only knows who else and I've forgotten what my Play Toys look like. :_|
Life was so much easier when I worked for a Boss. ;)
Col
by ron k. Accepted solution
by oh smeg Accepted solution
And do as suggested above. Get a couple of systems and tear them apart and rebuild them several times at both the Software and Hardware levels. That will teach you far more than any class could. ;)
There also used to be very Inexpensive CD's available with instructions on Repairing Computers, I've never actually used one but I've been told that they are quite helpful to those who are not quite sure what they are doing but I personally prefer things like the Ultimate Boot CD as a Diagnostic Tool.
http://www.ultimatebootcd.com/download.html
It's very good and what makes it even better is it's regularly updated and it's [b]Free.[/b]
Col
by oh smeg Accepted solution
You have used that Disgusting 4 Letter W word yet again. :0
Will you never learn?
Col :p
by ron k. Accepted solution
by shasca Accepted solution
Interesting opines folks.
I don't think I would have had a clue as to what I was doing if I hadn't gotten some classroom training prior to diving in head first.
I can't always figure it out all by myself. I need someone to explain to me why.
" But the book said it's supposed to work like this"
Maybe, just maybe, it doesn't come to all of us as easy as it apparently does to youall.
I stand by my advice to get some classroom traing first.
If it's taught at a local Communit College it can actually be a kick in the sss and be a way to network with others.
Maybe being a "Lone wolf" isn't the best way.
If you are wanting to start a business, and have NO previous jobs to use as references, some schoolin on your business card just may open that first door to that first job.
by santeewelding Accepted solution
That's how I did it.
I was so bad that, in my very first class, when he said, "Okay, folks, turn on your computers", I had to ask, "How?"
If not for that class, I would be looking still for that button.
by ron k. Accepted solution
I've been breaking and repairing my own computers since I had my first Tandy 1000HX, an 8088, way back in the late 80s. I remember seeing a warning flash on the screen that if I didn't shut my computer off immediately it was going to be permanently damaged. To this day I don't know what I did wrong but I tried to duplicate it.
I had to learn how to write my own batch files after accidentally deleting the Autoexec.bat file.
I had to learn TONS to do everything that I wanted to do, even the little things like playing a game. I don't even know if there WERE classes back then.
I've had 'Dummies' books for every OS.
To cut this short- To go up against the brick and mortar businesses that've been in the business of fixing dozens and dozens of computers per week, with all kinds of issues while being a person not having more than just an inkling of what's going on inside of that box is a bit unrealistic, to say the least.
by shasca Accepted solution
Thats like saying no one would ever want to buy baked goods from a small corner bakery.
Hell there is a Safeway over there, and oh look there's a Piggly Wiggly over there too.
Next point in check Ron you say it matter of factly. "I have been playing with computers for 30 yrs". So it should just be matter of factly to everyone else too.
Even if they just learned how to use a mouse and keyboard yesterday.
Soooo when starting in their mid 59's by the time they are 90 they will have been able to self teach. "Pshaaw with getting any kind of education".
by ron k. Accepted solution
According to your logic Suzy Homemaker can make a go of it against the small corner bakeries even if they're on every corner. What the hell, why not; she's been baking for a whole semester. She should just go for it. Invest time and money into it.
If you knew me, not pretend that you know me but actually did, you'd know how pro-education I am so your painting me as if I think everyone should remain ignorant just doesn't fly.
Computers are my hobby, nothing more. I don't give a ratzass if I ever make a buck from them. Hobby-wise they're a lot of fun, most of the time. Some noob wants to try to earn side money, he can knock himself out.
I made a great piece of toast just now. I think I'll open a restaurant.
by shasca Accepted solution
It's a given we will never hear from the Original poster ever again. Lost an inquisitive mind because multiple people said booo on persuing your dream, just do it in your garage, and like it............
If you try to be an entreneur life will just beat you down.
by santeewelding Accepted solution
by ron k. Accepted solution
by shasca Accepted solution
I always have, always will love my TR FamilY.
Why you ask???
by oh smeg Accepted solution
Because Santee knows that the nasty HAL is lurking around here just looking for an opportunity to open a Air Lock door on someone. :^0
Oh Look I'm Flying now why can't I breath? :0
Col :D
by ron k. Accepted solution
I've laughed right out loud at some of the posts. I'm of the opinion that there are some true geniuses that hang out there, as well as here, and it's too cool to see them let their hair down. It does not mean your have to abandon TR but it has been a welcome shift in paradigms for me.
Try it. You'll like it, practically guaranteed. Now I promise not to bug you henceforth. Please note: I get 2 points for using henceforth properly in a sentence.
by ron k. Accepted solution
by santeewelding Accepted solution
Is for [b]shasca[/b] to step up and admit the same.
Neither of you would be interesting if you didn't have one, by the way.
by boxfiddler Hot topic Accepted solution
anybody say [i]persuing your dream, just do it in your garage, and like it............[/i]
I did see 'save your money, plenty of good certification courses online, get your hands dirty'...
Interpretation is 'everything'. Each of us is different in how we speak. We need, too often, to take a moment to 'step outside' our perception long enough to think about the meaning in the words used.
by older mycroft Accepted solution
by .martin. Accepted solution
get a couple of old machines, (windows 95, 98 or 2000, any that you can find cheap), and slowly work your way up, play around with them, at first you will kill parts, but with time you will get more confident, and learn what to do, and not do.
otherwise look on the internet, don't bother paying top dollar to learn, everything can be found out on the web, mostly for free.
by ron k. Accepted solution
It's heartening to see that occasionally I'm not too far off of the mark.
The computer comparison to cars is overdone. I compare it to remote controlled flying. Relatively easy to buy a box stock plastic plane or worse yet, a helicopter and give it a go. It's quite a different matter to build a several thousand dollar craft from balsa and take that puppy out for your first flight.
My SIL's uncle recently caught a virus on his Vista computer. I'm known not to work on Vista computers so they didn't bring it to me. After having the Geek Squad look at his pc and be unable to fix it he took his Vista POS out and threw it in his big woodburner, flat screen monitor and all. He can afford to do it. I wish I had video.
The point is that many people aren't going to spend $100.00 to get a $300.00 box fixed. I wish I'd gotten it, just to see, but I didn't.
I don't want to spend the bucks for the Vista or Windows 7 OSs to learn where everything is and how to fix it. Not yet. I have 3 spare boxes that are probably Vista compatible but they're running just fine on XP so I can't justify the expense. Yet. Again.
A person can go broke just trying to stay even with the curve much less trying to get ahead.
At one time, years ago I had five extra pcs all lined up, networked, upgraded and ready to go. Some one of my friends may just inherit them. Now we only have 6 and they're used, not porno machines.
Then too, if you fix a computer right, you may never hear from that person again because they have enough security and you've tutored them to the point about using them safely. That's happened here. I have computers out there for years now that are plugging away just fine.
For me it's not a hobby when it feels like work, so I don't do it. I have the freedom to say no. No as in NFW am I going to try to fix it. Thanks but no thanks. I don't need the extra beans it'll bring in along with all of the aggravation they bring when dealing with clueless users.
It's sometimes all I can do, exhausting my knowledge, just to keep our six networked computers safe, tuned up and secured. It takes away from my free time. I whine about it, even though I learn or relearn something.
Backup backup backup is my mantra. I have backups of backups.
One of my friends is pretty knowledgable on keeping his machine safe so what happened? The MC club he belongs to gave him the task of designing their website. :^0 Better him than me. They had a quote of $1500.00 to do it. I told him to argue that 1500 bucks was reasonable to get them to pay it. Screw that noise of having to build one from scratch to save 'them' money. Next thing you know he'll be programming everyone's cell phone. He works long hours. I told him to say screw it. Don't know if he will. Bring ME a cell phone and if you're not an immediate family member you'd be SOL.
I've fixed enough computers to payback what it cost for my COMPTIA A+ certifications. That's quite a racket they have going. I wish I owned a testing center. Good money there.
I'm out of steam with my usual rambling. Sorry about that. My morning coffee kicks ass.
by ron k. Accepted solution
Perception counts for a LOT. I have gotten real jobs to perception. Everyone I've ever had.
It is quite different explaining yourself in person rather that the flat screen notes we leave here. Here we have no facial or body language cues, little interaction and feedback. Proper phrasing can be everything and even then it's just not good enough, open to interpretation based upon a person's experience.
Preaching to the choir, I know, but I'm bored and just felt like talking to you, so there.
by dkeith45 Accepted solution
The number two post by Ron.K. is good advice.
I'll add to it by saying that a good way to learn is by building your own system. Often gaming guides are a good source for the right parts. I used to get system building advice from Computer Gaming World... are they still around? They'd always have a "Good, Better, Best" system listing all the components. I always went the "Good" system.
Also, watch the roadsides during trash day, go to the recycle dumpsters etc... you will often find computers thrown away that are restore-able and that will give you good experience.
Read up on how to wipe hard drives, then put an add in the paper offering to take used computers to recycle saying you'll wipe the hard drives first... then use the systems to learn on. Learn how to find, download and install the missing motherboard drivers etc from the manufactures website after a wipe.
If you're lucky, you might have someone among your friends or family who has some knowledge who you can call for periodic advice.
Some of the "Dummies" books can be of great help... even the very old "DOS for Dummies" as the old DOS commands still come in handy at times.
Get a good "How to" book such as "From Serf to Surfer" by Matthew Strebe... it's out of print and outdated "circa 2000) but still offers lots of good advice and info for anyone wanting to become an IT tech or a plumber for that matter. You can often find old books such as this on Ebay or Amazon.
Finally, keep looking around here on TR... lots of good advice floating around here.
GL
by dkeith45 Accepted solution
Learn how to find, and backup, email files, address books, documents, music, pictures etc... prior to cleaning a system of virus's and bots... or doing a total reinstall.
Learn where such files are stored and how to transfer them back to their proper places if a reinstall is necessary so the clients most important data is not lost.
Learn how to pull a drive from a failed system and install it in your personal system to backup files or clean virus's.
Learn how to pull hard drives from Laptops and install them in your personal system to clean and backup data.
Learn how to do drive to drive copies to save the data on a failing HD.
Learn how to use Linux to clean MS systems.
Learn how to navigate MotherBoard BIOS programs.
Learn how to find the Windows CD key located in the OS in case the client has lost it.
Learn to be patient when calling Tech support, because you can't know everything and sometimes have to call MS or others for help.
Be sure you have a love for it. IF you can spend 18 hours working on a system and tho you may cuss a bit here and there... still LOVE it... then you are on the right track.
by ron k. Accepted solution
by dkeith45 Accepted solution
Maybe we scared him off with all the nonsense that always go's along with newbie comments like his? That's par for the course around here and it helps to have a thick skin to glean the grain from the chaff, heh.
Yup, ya gotta love it, especially if you plan on working on home computers... ya gotta have the right kind of personality to be able to deal with lots of individual people who know nada about their computers.
I'm one of those who is always watching for thrown away computers along the roadside, in the recycle dumpsters etc... it's exciting when I find one... I wonder if the OS is still intact? How much memory, what size HD etc... can I fix it or use the parts? My wife will shake her head because she knows I won't be getting any chores done for a day or two while I play with my new toy, heh. I usually donate the fixed stuff to churches, or people in need. Fun stuff indeed.
This discussion is closed to new replies.
Trending Software posts
Sort by Trending