First the drive should be detected on start up. You should see it just as you see the hard drive. If it doesn't show and you know the jumpers are right you might have a bad drive.
If the drive showes up on start up. Find mscdex.exe and write downthe directory. It should be in the C:\windows|command directory. Write down the directory of the CDRom driver.
In your Config.sys edit this line.
Device=C:\aaaaaa\bbbb.bbb /D:mscd001
Where aaaa is the directory of the CD driver.
Where bbbb.bbb is the CDRom device driver.
In your autoexec.bat edit this line.
c:\windows\command\mscdex.exe /D:mscd001
This is if mscdex.exe is in the C:\windows\command directory otherwise change the location.
reboot and press F8 every couple of seconds till the menu comes up and select step by step confirmation. You can watch the drivers load and the results. If all goes well you'll get cd.
I have a generic CD driver install disk that works with everything I have come across. I could zip it and email it to you.
Good Luck Lee