Desktop

Ask something
Discussion Locked

no display

0 helpful
5 replies

by wonder_spider2002

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi
i have problem with motherboard the problem is i get blank screen when i start computer.i get VGA screen(sis 8MB)then screen goes blank no post screen no bios screen nothing i removed everything pull out from case pluged only vga ram power supply processor(changed processor_still same problem.is it bios faulty?

5 replies

by toivo talikka

If the same monitor works with another computer and your graphics outlet is integrated with the motherboard, add a PCI graphics card and connect your monitor to it.

You may have to check the BIOS and change the graphics option to PCI.

by wonder_spider2002

thanks for help but i have changed both agp and pci display also tried another monitor still same.i cant see bios setup screen goes blank not dark.

by hal 9000

Well as the obvious isn't working have you tried clearing the BIOS and see what happens?

There should be a jumper on the M'Board that you can use to clear the BIOS and then just set the time & date and see if the system boots. If that works you can then start to tinker around with different BIOS settings.

Col

This discussion is closed to new replies.