Discussion Locked

No domain logon screen

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Good morning. I have a laptop here that used to have a domain logon screen. The network settings are correct, with Client for Microsoft Networks, logon and restore, and a good nic connection to the hub. Does anyone know how I can force the logon screen to pop up, with the domain?
Thanks!

5 replies

by firefox

Hi!
I don't know what O/S you are using, but in Win9x that could happen if your network setting isn't correct in your MSDOS.SYS file. It's a hidden, system, read-only file in your root. Remove all the attributes and edit the file. In the [Options] section, you should have a line that says Network=1. If it says Network=0, you won't get a login screen. Here are the steps from the MS-DOS prompt:
cdattrib -s -h -r msdos.sys
edit msdos.sys
make your change to Network=1
File, Save
File, Exit
attrib +s +h +r msdos.sys

Exit DOS, Exit Windows, and Reboot the computer.

I hope this helps! :-)

by cricket_moon

Tried this, but found that the Modem is properly installed, but the Ethernet Adapter is not. Thanks, though.

by butthammer99

I've had that problem in the past when Windows 98 could not properly setup the NIC. It looked fine in Device Manager but.... Clik Start, Run and type in . Press the return key. It should open a window that lists IP, WINS, DNS and other things, but the important thing is it will show your NIC. Make sure it is seeing that. If not, remove your adapter and re-install it using the PC manufacturers specs.

by cricket_moon

Sorry. More specifically, I am using Windows 98 Second edition. It's a IBM ThinkPad with a 3Com Mini PCI Ethernet Adapter/Modem. Only the Modem is recognized by the system. The Nic is not. This has turned into a seperate issue entirely...
Thanks

This discussion is closed to new replies.