16 replies
by boysun
by calves
Does it have a proxy?
If you net has a proxy you need to configure your IE to pass thorugh it.
Go to Tools, Internet options, connections, Lan settings, and set as you need it.
Also, go to Tools, Internet tools, connections, setup, and run it again, selecting LAN connection.
Good Luck!
by boysun
Another one: you reinstall your system and have same problem? May be you change network name of your computer and DHCP service dont know you computer (dont know configuration of your DHCP) and you not get your real IP address. Run WINIPCFG and see this.
Or DHCP service misconfigured.
by boysun
by billy
1.Is your router ip address the default gateway in your tcp/ip setting?
2.If you are not aquiring tcp/ip config from the dhcp server are you using a reserved ip address outside the dhcp scope?
3.Triple verify your IP ADD,Subnet Mask and default gateway.
4.Run "route print" from your command prompt and verify route setting.
5.Verify the "LAN Settings" under the "connection" tab under IE are all unchecked because based on what you stated you are not running proxy server.
by boysun
by dmiles
by boysun
by shs_bulldog
by boysun
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending