4 replies
by thechas
Are you sure the computer is powering up?
Next, check the voltage switch on the new power supply to make sure it is set correctly.
Depending on your system, you may need to plug in an additional 4 pin power connector on the motherboard.
Finally, why did you change power supplies in the first place?
If your old power supply was bad, it might have damaged the motherboard.
Chas
by mjd420nova
by bork blatt
Do you get one short beep from your PC when you switch it on? Or do you get two short beeps or some other combination?
Two short beeps usually means something wrong with display card, or Monitor not plugged into display card.
Silly question, but do both test monitors work when plugged into known working PC? If so I would say your screen card or motherboard got damaged in some way.
If you get one short beep (i.e. the computer Power On Self Test was successful) I would check the connection between monitors and PC. Did you use the same cable to plug in each monitor? Try another cable.
I am having this error right now.
Few days ago i decided my psu was finally shot.
"hence not powering up"
went and bought new psu installed it.
computer powers up yet nothing.
i went and hooked it all up seemed to be fine. then got a random freeze @ loading from cd screen.
i reset and nothing.
My computer use to make one short beep as it power'd up
"power up beep" im assuming. it now does not beep nor do not get any moniter reaction. ive tried countless moniters i've rewired countless times and cleaned gfx card slot out and still nothing.
possible overload / shortout?
also if my main board was damaged why would it of booted up with a display screen when i first booted it after psu change?
SOS
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending