Question Locked

Nook simple touch back cover fixing

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

its screen frozen. not reseting.
I opened back cover, battery taken out and again fixed. it restarted again working.
but when I tried to fix back cover it again hanged.
when I keep cover out it works otherwise not.
pl suggest me what to do?

2 replies

by robo_dev

and causing a short circuit, or there is a cracked solder connection, and the cover puts force on a cable, opening the connection.

Have never looked inside a nook....If there are any ribbon cables, carefully unplug and re-seat them, there typically are hinged locks which hold ribbon cables in place.

Inspect any visible solder connections, especially for ribbon connectors, under magnification to see if you see any cold solder connections or cracked traces.

Also look closely for signs of a ribbon cable or wire misrouted/pinched/damaged during assembly.

If there is a water detector patch (white sticker with pink dots), make sure it has not gone all pink (if unit got wet).

This discussion is closed to new replies.