Discussion Locked

Not detecting audio CDs

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a windows 98 computer that is not detecting audio cds. The audio cable is connected from the back of the cd player to the sound card (which happens to be integrated on the main board). I have also tried changing cd-rom drives. Every application I try to use (media player, real juke box, windows cd player) all tell me to insert an audio cd, even though it is already in the drive. When I look at the drive in exploerer, it says there IS an audio cd in the drive.

Any clues?
Thanks

9 replies

by taxlady11

Using your Windows Media Player, make it full-sized. There is a menu on the left. Select "CD Audio". This should access your cd. Tracks will be isted on the window; you can select which track to start off from. I hope this is helpful.

by clarker

I have had a similar problem, try this,
go to control panel > add/remove programs, select windows setup tab and uncheck all multimedia sound stuff, then apply the changes and reboot. After reboot go back to re-check what you have removed, this should sort it out.

cheers,

Rich.

by abelnguyen

I don't know clearly your situation. However:
- Did you check the file type associations?
- Can you read files in the CD? If you can't. You may want to try to clean the CD-drive. I don't think this help, but give it a try.
- Did you try to open an audio CD file by double click on its name in Windows Explorer?
- Did you install the right drives for that CD-drive? Did you try reinstall?
Well, that's all I know. And sorry if it does not help

Good luck,

This discussion is closed to new replies.