The following is Novell's website recommendation to resolve a locked device error:
1- wait for a while: the task in process may complete and free the device
2 - retry the action that resulted in the error
3 - load Monitor.nlm, delete all userconnections and disable logins
4 - for a disk device error, unload NLM programs (other than the device driver) that may be using the disk. Dismount all volumes on the disk.
If you have tried all of the above without success, contact your Novell Authorized Reseller representative or the drive manufacturer.
I would also check to make sure that you have enough RAM to handle the new volume.
The memory requirement for each DOS volume is:
M=.023 x volume size (in MB) /block size
The Memory requirements for each volume with added name space is:
M=.032 x volume size (in MB) / block size
The total memroy required is the sum of each volume's requirement + 2Mb rounded to the next higher Mb (with a minimum server memory requirement of4Mb). Actual require