Discussion Locked

Novell 4.1 ADSL

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there any way to share out a adsl connection using a Novell 4.1 server. PPPOE protocol is a requirement for connection over the dsl link. I understand that Novell does not support PPPOE but does anyone know of any 3rd party solutions?

5 replies

by grbeckmeyer

Yes, this is possible, I have set it up for a customer. It does require that the server is capable of NAT...which I don't believe a stock 4.1 server is. Small Business Suite, Bordermanager, and I think MPR all add NAT capability to a 4.11 server, or if it's time to upgrade anyway, Netware 5.x is can do NAT right out of the box. Go to www.support.novell.com and search for TID 10017727, or just search for ADSL. For the setup I did, the aDSL router hands out a private dynamic address, but since it the server is connected full time, it rarely changes. I just connected a workstation first set for dynamic, checked the IP configuration, then manually set that config on the server. Another option I have used for a couple customers is to run Winproxy (www.ositis.com)on a workstation with 2 NICs, one for the DSL connection and one for the private network.

by kevin

Here are several 3rd party products that are out on the market that do provide easy setup that would allow you to share your DSL connection. 3com has several Office Connect firewalls that will protect your network from hackers and gives access to the internet for all your workstations. Ramp Networks has the 600 and 610i series of WebRamps for DSL Connections. Cisco also has an 827 Series Router that would also do the trick. The 3com and Ramp Networks products provide DNS and DHCP services which would allow for easy configuration of the workstations.

I would NOT recommend trying to use your existing server or upgrade your existing server to become the firewall/proxy server. Doing this would put your server live on the internet making it more susceptible for somebody to hack into and get to your data. Also, if a hacker attempts a DOS on your server and brings it down it affects everybody on your network. If you have a 3rd party product or a different server acting as a router,if it goes down people loose internet connectivity for a while.

This discussion is closed to new replies.