13 replies
by bowler66
Check out TNG by CAI http://www.cai.com/unicenter/
I
by hachiss
by don_brill
by hachiss
by stanps
Assuming you're using IP on all the servers, you could have something set up to ping them periodically. That by no means will be a guarantee that the server is up and functioning normally, but at least you'll have a fairly good idea if it's even upor not. Take a look at this page for the monitoring utility. I've used it myself.
http://www.novellfans.com/n4util.asp
Hope this helps.
Stan :)
by hachiss
by dnagdev
Why dont u use SMNP.
Regards,
Danny.
by hachiss
by nick.egloff
I've found Darwin Collins' NCHKSTAT to be very helpful; you configure the basic "config" file to check SAPs and/or IP pings, then set up your base web page with the "tags" that you put in the config file.
From there, you output the results to your Novell web server, and operations/helpdesk can check and see what's up / down, and even when it went down or came back up fairly easily.
by hachiss
"What's Up" is a good program for implimenting the "ping" solution. It pings each server in sequence, and sends an alpha page or netware message when an address stops responding. Useful for non-SNMP devices.
Netware has a utility on their Website called On-Site Admin. It's a great tool! It has a monitor window that you can drag servers into, and monitor CPU Utilization, Ping, volume usage, and connection usage. It also has lots of other tools built in, such as distributing files or commands to a group of servers on a list.
by hachiss
by hachiss
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending