Novell 4.11 w/CPQ Proliant 7000 SCSI tim
Our Compaq gives SCSI time out errors when trying to run backup on DLT tapes. We then have the shut off the server to recover. I could use any help you may offer.
Thanks, Dennis
Networks
Our Compaq gives SCSI time out errors when trying to run backup on DLT tapes. We then have the shut off the server to recover. I could use any help you may offer.
Thanks, Dennis
by gregc
by dennis
by mckaytech
I've seen the same thing on Compaq 7000 servers with DLT drives. What seemed to do the most good was to run the latest SSD (v2.17a) and then install the latest DLT drivers.
In the one case we couldn't resolve that way, it turned out to be an impending hardware failure in the drive.
But it concerns me that you're having to cold-boot the server as I haven't have that experience. If updating the drivers and SSD doesn't help, I'd be looking real suspiciously at the controller (once I had made sure all the cables are tight, etc.). If you have access to loaner components, this might be the time to try swapping them out one at a time.
paul
by dennis
by bblackburn
by dennis
by dennis
This discussion is closed to new replies.
Sort by Trending