5 replies
by rbgnr111
by sudney
by grbeckmeyer
Yes you can do it, and no you do not need BorderManager. Netware 5 and up includes NIAS (Novell Internet Access service), which you used to have to purchase Bordermanager to get with Netware 4.11. You should have no problems installing your modem as long as it is a true hardware modem, not a winmodem.
Check this link for instructions on installing NIAS...
http://support.novell.com/cgi-bin/search/tidfinder.cgi?10054217
Info on configuring NIAS...
http://www.novell.com/documentation/lg/nias41/index.html
and follow the link "configuring an on-demand PPP connection"
I have never configured it the way described there, though. I have always used INETCFG and manually configured the modem under BOARDS, set the dial settings in WAN CALL DIRECTORY, and under BINDINGS bind IP to the modem. One last gotcha, not sure if it would be a problem in NW5 or not, but in NW4, I usually need to add SET NAT DYNAMIC MODE TO PASS THRU = ON either manually at the console or to the autoexec.ncf so it sets every boot.
by sudney
by sudney
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending