Discussion Locked

Novell does not end inactive connections

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a problem whereas a user's machine will stop responding and the inevitable is to kill the power from the box. When the user tries to log back on, they can't because their previsous network connection is still considered "live". Our "time to live" packets are being sent once an hour. The concurrent connections are set at one. Any help you can provide will be much appreciated. Reference to KB articles would be preferred. Thank you in advance.

7 replies

by dcassat

You did not specify the version of netware that you're using.

I have seen this problem in 3.12 and there was a service patch for it, but that has been several years ago.

by dcassat

You did not specify the version of netware that you're using.

I have seen this problem in 3.12 and there was a service patch for it, but that has been several years ago.

by mc.holmes

TID 10020786 seems to describe your situation.
Do you find in addition that you can't clear the connection from the Monitor window of your server? Does the server experience higher than normal utilization when this happens?
Hung connections are usually the result of 1) misbehaving lan card/driver; 2) misbehaving disk controller/driver; or 3) misbehaving NLM - most commonly antivirus.
You can potentially prevent hung connections by updating drivers or NLMs or swapping out hardware for different card/driver combo.
The connection cannot be cleared because a driver is hanging while involved in a critical process such as modifying the FAT table while opening, creating or deleting a file.
Hope this helps!

This discussion is closed to new replies.