Discussion Locked

Novell Netware 5 backup solution

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to know which is the best backup solution for a very large central ops, data center running Netware 5 servers. Should I use tape, array, optical disk, etc....?

5 replies

by knelson

You need to give more info regarding how much data you need to back up and what kind of back up window you have. DLT tapes make a fast and inexpensive solution however the tape sizes are about 80gig. If you cannnot have any down time you may want tolook into a Storage Area Network (Like Xiotech) What you would do there is run raid 0 then when you needed to preform a back up you would drop the mirroring process. You would have half of the mirrored copies running live and the other have would beavailable to back up. Doing this you would have an almost limitless back up window. Please supply more info. Besides since you run netware you would take advantage of Novell Clustering with your SAN if you went that route. Hope this helps.

by malibu81

First a few questions?
1. How Much Data?
2. All Netware 5 servers?
3. Any Downtime Avail?
4. Budget?
5. Dedicated to Enterprise, Group, or Tree?
6. Support by Backup application Vendor for Backup Devices? IE. What devices do (Novell (Sbackup support, ArcserveIT, Backupexec and others)Support For O/S?

My sugesstions,

If you data storage requirements and availability fit the tape needs, AIT and DLT Technologies are efficient. You will need aprox three hours to store aprox. 40 GB of data to DLT and aprox. 2.2 hrs for the same on AIT. to get complete backups all users off system in progress (downtime)and all apps stopped. if scheduled properly this could work. Also, tape libraries could help you store much more enterpries data. But cost is high and so is the amount of time needed to backup all aditional data.

Other Options. Optical cost is much higher than tape, but is efficent.

SAN - efficent, cost comming down?

Other options - Online backup
follow please..
1. Add increased capacity to current servers,
backup live data disk to disk for complete
backup with minimal downtime. Have enterprise backup server then backup the backup drive set, while production keeps going. Backup disk to disk is much faster with less downtime that disk to other media.
then users can then access the live data while the backup set is moved off to tape or optical. aids in restores also because data is only a day old and online.

2. Build a high end matching server with enough capacity to cover complete enterprise backup write script to backup servers to this server (server to server data only)and then backup this server to tape or optical. requires much less downtime and you have a hot area for online restores.

Hope this helps.
Frank
CNA 3.x,4.x CNE 5.x in progress

This discussion is closed to new replies.