Discussion Locked

Novell VLM

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have a client running a Novell network and the workstations are running Windows 3.1, yes 3.1. The VLM was loaded into the high memory area, but now something has changed and the VLM is showing the conventional memory area. How do I get the VLM back up into the upper memory are. Does this VLM get loaded from the Startnet.Bat file. If so can I just go in there and tell it to load high.

TIA
Robert Payne

7 replies

by msibrad

It has been about 2 years since we phased out our last 3.1 workstation, but if memory serves me right, you are correct that the VLM gets loaded from the startnet.bat file. I'm not sure if you can tell it to load high in the batch file or not, but it is a good place to start. Hope this helps.

by rmed

It's loaded in XMS by default. Here are the keys that you can try:

VLM /MC - conv.memory;
VLM /ME - expanded memory (EMS);
VLM /MX - extended memory (XMS) (default).

VLM /D - diagnostics
VLM /Vn (n=0..4) - information.

And yes, it's loaded from within startnet.bat, as usual.

good luck

This discussion is closed to new replies.