Discussion Locked

Nprinter on Netware 4.2

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am running Nprinter on several of my workstations that have printers attached directly to them. About once to twice a day the printer will "lose" its connection to the network. We have to reboot the machine or rerun nprinter. The workstation can still access the network drives, but the printer is lost. Any suggestions?

7 replies

by de.almeida

I am supposing you are using Nprinter95 with Win 9x or NT on the client.

Check the following :
- Client software
Nprinter is recommended for use with
the Novell Client (current version is
3.3 for Windows 9x and 4.8 for NT)
- NOS software
Nprinter works through SPX, please check
SPXS.NLM version you are using.
I believe the current is from Service Pack
8A and is dated 22-2-1999.
Service Pack 8A fixed various SPX faults,
and it's the current SP for 4.x. You can
get it at
http://support.novell.com/misc/patlst.htm

- Read the following TIDs
NPrinter95 FAQ (TID 2907959)
Troubleshooting NPrinter (TID 10019104)
Losing connections (TID 2918515)

- Go to Novell Knowledge base
http://support.novell.com/search/kb_index.htm
search for "Nprinter95 losing connection"
read other TIDs not mentioned here

Hope it helps
Joao

by acurrin

Check whether RConsole with work consistently from the PCs in question. It also uses SPX and could help explain the problem.

Change the frame type on the workstations with printers from Auto-Detect to the specific frame type used on your network.This solves a lot of problems related to SPX.

by hrumbough

I do not use RConsole with any of my computers. The frame is forced to the actual frame type.

by techdictator

I seem to remember something about setting SPX connections to a higher value. Then again, you should get a stand alone print server. Anything else is second rate and can be expected to fail.

This discussion is closed to new replies.