17 replies
by aksrini
by nicemouse
by aksrini
by david
by aksrini
by john140
We have used a utility that allows one to recover the password on an NT macine. It is available from Winternals. You can read more about it at http://www.winternals.com/products/#ntlocksmith. It requires that you also purchase another utility called NTRecover.
It can be a handy utility to have. Of course you must be able to physically access the machine in question to use it.
by aksrini
by joemcse
http://home.eunet.no/~pnordahl/ntpasswd/bootdisk.html
Linux boot disk to change admin password to whatever you want. Only thing is, won't work if you ran SysKey.exe on system (encrypt SAM).
by aksrini
by mark_leddy
This is free.. it will require you to edit the registry of the NT machine. If NTFS you will need a second copy or parrellel installation if fat you can try to save the registry files to floppy use on another machine, etc.
For the detailed directions go to:
http://www.ntfaq.com/ntfaq/recovery18.html
The prodedure has you chage the registry to run the command "net user administrator password" rather then run the spooler service.
The Net User ADMINISTRATOR PASSWORD - will reset the password to PASSWORD.
by aksrini
by khunter
Install NT in another directory (i.e. c:\WINNTBK). You can remove it later. Boot to the directory that you just installed. copy SRVANY.EXE from the resource kit to c:\temp. Run REGEDT32.exe. Click on the root of HKEY_LOCAL_MACHINE. Then go to Registry / Load Hive. Select the file SYSTEM. in c:\WINNT\SYSTEM32\CONFIG and select open.At the Key Name screen enter DomainSystem and click OK. Note the value of the key HKEY_LOCAL_MACHINE\DomainSystem\Control001\services\Spooler\ImagePath. Change this key to C:\SRVANY.exe. Next go to the key HKEY_LOCAL MACHINE|DomainSystem\ControlSet001\Services\Spooler\Parameters. Create 2 values under Parameters (1) "Application" with Type: "REG_SZ" and Value: "C:\WINNT\SYSTEM32\NET.exe" and (2) "AppParameters" Type: "REG_SZ" and Value: "user Administrator password"
Note Administrator is the Administrator userID, If you have changed the name use the name that you used on that machine. password is the new password that you want to assign to that account. Nowexit out of Regedt32
by aksrini
by bleechack
I have used l0phtcrack(www.l0phtcrack.com, yes that's a zero) before and it seems to work very well. I usually connect to the server's registry and choose run crack and it should get you what you need. Probably something we should all be doing to ourselves before the hackers do.
-jp
by aksrini
by aksrini
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending