7 replies
Sorry, I'm not too clear about your question. You say they are getting a DHCP address when they dial in, but the S/N mask is not included? In the RAS server service Network properties, is the TCP/IP configured to give the clients an address from theRAS static pool or 'Use DHCP'? Clarifying this would help a great deal.
Then there's this other statement about scopes. Don't you have a S/N mask in each scope? I wouldn't think you could create a scope w/o one. SO I will assume you do. I would have the RAS clients use the network DHCP server. As an alternative, goto the client, network properties, TCP/IP properties and assign an addres and s/n mask there. Don't know if you can assign a s/n mask in the RAS/DUN preperties of the workstation..Hope this helps.
by argent
by bill.parks
This is by design, according to MS. Your clients get their mask, gateway, WINS, and DNS from your RAS box, meaning, the settings you configured for it are passed on to them. The only thing they get from DHCP is an IP address that's been "cached" by the server.
And I quote, "...the subnet mask is not passed by the PPP Server. IPCP is the PPP component that passes TCP/IP address information, and the subnet mask is not defined in the Request For Comment (RFC) as a legal value to pass. RFC 1332 explains IPCP."
Check out these articles, Q160699, Q138238 and Q233169.
There is a way to get around this, create a classfull subnet with your core switch/router, and allow RAS to operate off there. Let me know if you need further assistance.
by argent
by smcclos
by argent
by argent
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending