Discussion Locked

NT server crashes everytime while loadin

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a HP server(model LC2000)loaded with Windows NT4.0 server with SP5.The server is also loaded with MFISC database application s/w plus Lotus Notes 5.5.So whenever i try to load or install any updates of above applications through CDrom ,my NT server just crashes after 20%-30% progress displaying dead blue screen with lots of error codes which i am unable to analyze the problem. As per the suggestions from some of my technical friends i have replaced the CDROM drive with new one of same kind .But the problem still exist. I have not tried installing other applications apart from above as they are not required. But i know same thing will happen for the others.One task i can do from cdrom is that i can do copying to harddisk easily without any hassles.Can any one Please help me out on this issue. Please don't tell me to install everything again on server because i have big database applications running on server.

Hoping for the best solutions from you'll.

Thanks
Javed

10 replies

by adza

hmmm i hope this helps, Make sure the comp is not overheating, like all of the fans are running fine and that its not in a hot environment. Next make sure the hard drive had no bad sectors, as it might be getting to a certain spot on the hard driveand then crashin. The only other time i have heard of this type of prob it was fixed by putting the cd-rom on its own, like it was a slave off the hd which was master and it was put to master on its own and it fixed it. Part from that i would go load a test hard drive with a clean OS to make sure its not software and it it still faulted just start replacing hardware. RAM, cables, maybe even bios updates. I hope this helps!

by adza

hmmm i hope this helps, Make sure the comp is not overheating, like all of the fans are running fine and that its not in a hot environment. Next make sure the hard drive had no bad sectors, as it might be getting to a certain spot on the hard driveand then crashin. The only other time i have heard of this type of prob it was fixed by putting the cd-rom on its own, like it was a slave off the hd which was master and it was put to master on its own and it fixed it. Part from that i would go load a test hard drive with a clean OS to make sure its not software and it it still faulted just start replacing hardware. RAM, cables, maybe even bios updates. I hope this helps!

by bradq

I have got around similar issues like this before by running the update/install off the hard drive. Copy the installation folder off the cd onto the hard disk in a temp folder. Run the setup program from the temp folder so the install isn't taking place from the cd rom. Hope it works!

by mtnsqs

I would check for overheating problems - is the CDROM located adjacent to the harddrive - if so try to put some physical space between them.

Secondly - how many harddrives do you have - is the power supply powerful enough to handle the CDROM running as well as all the hard drives etc - consider a new bigger power supply. I had this problem beofre - we in fact ended up blowing up the pwer supply. Its a 5 minute job to replace one.

To over come the problem short term - is the machine netwroked? Can you access another machines CD over the network? You will have to make a mapping to the CD to get it to load.

by javed_far

I want to inform you all that my problem is still pending. Also i don't want to do the reinstallation of OS and other applications as they are absolutely working fine. My only issue is i cannot perform direct installation of slw from the cdrom drivebut i can copy the contents to harddisk easily. My concern is the installation should happen from cdrom drive rather than from Hardisk or from any remote pc. The cdrom drive has been replaced and it seems to work on other pc. Please get back to me with some rigid solutions ASAP. Thanks for ur kind co-operation and help.

Regards,

Javed

This discussion is closed to new replies.