Discussion Locked

nt server installation of 28 modems

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I NEED URGENT HELLP REGARDING INSTALLING 28 MODEMS ON A NT SERVER MACHINE FOR REMOTE ACCESS (DIAL IN AS WELL AS DIAL OUT )
I KNOW ONE WAY THAT IS TO INSTALL THE COMPORTS CARD AND INSTALL THE MODEM BUT I NEED TO KNOW WHETHER DO I NEED A ROUTER FOR THAT. IF U HAVE ANY OTHER SOLUTIONS I MIGHT WELL CONSIDER IT
ONE MORE THING DO I NEED 28 TELEPHONE LINES FOR THAT 28 MODEMS OR I CAN DO IT WIHT OUT TELEPHONE LINE IF IT IS POSSIBLE WIHT ONE LINE THEN HOW,JUST LIKE THE ISP SINGLE DIAL UP NO ACCESS
THANKS IN ADVANCE FOR ALL U HELP

13 replies

by bill cassada

Moxa offers an excellent external port solution (not tailored for modems, but it will work) for up to 128 ports accessible simultaneously and it works very well with NT. However you sound as if you are needing some heavy duty communication lines...look into a full T-1 or better. I strongly recommend you contact your communications provider. Why so many modems and what is the environment you are using them in?

by dmiles

First of all you donot need 28 modems to configure a server for remote access,or you want to add the modems to your machines which in case that will be determined by the type of machines you have.
1-SERVER
2-NIC Card
3-CABLE (T1 LINE) this is forref. only
4-Hub (to connect cable to route your communications)
After equipment setup,you will now determine the netwoking configuration that will be best suited for your network.
You will be able to configure the permissions on the server as to whom you want to connect and use your network services
You will only need one ISP account and your email software.

by dc1

You don't need a router if you are going to install the 28 modems. I don't think 28 phone lines is necessary. You're communications provider can give you a cleaner solution than that.

by dc1

You don't need a router if you are going to install the 28 modems. I don't think 28 phone lines is necessary. You're communications provider can give you a cleaner solution than that.

by de villiers

If you are running a few servers, you can install as many modems ons each bdc as you have space for, this may be cheaper. Schedule the people that use RAS so you have time manangement on the devices.
You may also want to phone your local ISP and get a multilink dailup number, connect your site with a direct line, then you can have more than you need at a lower price.

by salexiev

Hello,
I will try to make two suggestions:
1.If you really want to use NT as RAS you might use specialized extended COM plates ? at instance Equinox?s (www.equinox.com). You might use NT as router, so you will not need other appliance. About 28lines ? it depends from your telco ? which might offer you T1/E1 with mux, standalone wires, wireless or something like this.
2.You might try to use specialized device to do the RAS job. I recommend it, because you will have a lot of additional features and still could use the preferred NT ones (such as using NT for authentication via MCIS). So I would recommend you to use device as Lucent/Ascend MAX 3000.
Good luck.

This discussion is closed to new replies.