13 replies
by coily2
by grioslazo
by jsarosy
by grioslazo
by loc
by grioslazo
by rindi1
by grioslazo
by stephenr
From my dealings with this, starting from SP4, you need to copy hal.dll.softex to %systemroot%\system32 - as hal.dll. Rename the old one first or course. As the other comments have stated, you need to make sure HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
PowerDownAfterShutdown = 1
On the first shutdown, system still uses old hal.dll. Next shutdown system should poweroff, p.v. the system supports it. This only works if you select Start --> Shutdown. If you press Ctrl+Alt+Del andselect shutdown, machine will give you the little dialog box instead why?
If you don't have at least SP4, machine will just reboot everytime you try to shutdown....Stephen.....
by grioslazo
by anandu
copy \I386\HAL.DLL.SOFTEX from SP4 (or later) to your \%SystemRoot%\System32 folder as hal.dll. For a standard multi-processor, copy \I386\HALMPS.DLL.SOFTEX to your \%SystemRoot%\System32 folder, also as hal.dll.
Edit: HKEY_CURRENT_USER\Software\Microsoft\WindowsNT\CurrentVersion\Shutdown
Add value LogoffSetting as a REG_DWORD
0 - Logoff
1 - Shutdown
2 - Shutdown and Restart
3 - Shutdown and Power Off (when supported)
Add value ShutdownSetting as a REG_DWORD
0 - Logoff
1 - Shutdown
2 - Shutdown and Restart
3 - Shutdown and Power Off (when supported)
You can alos edit:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
Double click on PowerDownAfterShutdown or add it as REG_SZ. Set it to 1.
by grioslazo
by grioslazo
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending