Discussion Locked

NT unhandled access vioation 0x0142 -whe

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can anyone lead me to a site that might help or has anyone ever come across this message while working on an NT machine. The only way to get out of it is to power down and unfortunately loose all the work for the past hours , it has happened 3 timesin the last weeks . The message
"FATAL ERROR UNHANDLED ACCESS VIOLATION READING 0X0142 exception at 36010432H. Is the hardware going or is this a clash of programs? Any help would be greatly appreciated.
Thanks

5 replies

by maxwell edison

That sounds like one of those dreaded AutoCAD errors.

Is this AutoCAD 2000i?

Fix: Install the AutoCAD 2000i Service Pack 1. It appears to fix this bug, although the fix is not mentioned in the Service Pack documentation.

Regardless of the version, make sure you have all the latest service packs installed. Autodesk has addressed the issue in those service packs.

(If it's not with AutoCAD, let me know.)

Maxwell

by maxwell edison

.
.
An AutoCAD 2000 solution?

When you select the Linetype drop-down list from the Properties toolbar or the Properties Window, the following error message is displayed sometimes:

FATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at XXXXXXXh

This error occurs when both of the following conditions exist:

* The "Standard" text style, which is listed in the Style command dialog, has a TrueType font assigned.

* One of the standard complex linetypes that contains text characters is loaded (for example, GAS_LINE).

Autodesk has three work-arounds to this bug:

* Avoid assigning linetypes directly as an object property through the linetype drop-down list. Use the Layer Manager, instead.

* Purge unusedcomplex linetypes containing text.

* Modify all complex linetype definitions containing text to explicitly reference SHX fonts.

More info at:

http://www3.autodesk.com/adsk/support/techdoc/0,,265562--125750,00.html

(REMOVE SPACES from the pasted URL.)

Maxwell

by maxwell edison

.
.
Another possibility:

SOLUTION:
This error will occur immediately after the logo screen appears when initializing AutoCAD.

This is caused by an incompatible parallel port setting. To resolve the problem, change the BIOS settings (hardware configuration settings) for the parallel port. Use one of the following settings, which work for most systems:

Mode:
EPP or Standard/Normal/AT
ECP
Standard
Bi-directional

Note that not all computers use the same terms for the parallel port settings in BIOS. If the above settings do not exist, or do not work, try all the settings until you find one that works. Some computers do not allow the parallel port settings to be changed in the BIOS. In this case, contact the manufacturer of the computer for:

1.) Instructions on how to change the parallel port settings.

- OR -

2.) A BIOS update that will allow you to change the parallel port settings

Maxwell

by maxwell edison

.
.
Something else to consider:

Make sure you have the latest driver for your graphics card. Set your system’s virtual memory so the low limit is three times your physical RAM and the upper limit is whatever Windows recommends. Configure AutoCAD’s graphics option. Go to Options|System|Properties. In the lower right corner of the 3D Graphics System Configuration dialog box is the option for hardware or software acceleration (see figure 1). If you use the hardware option, you must find a HEIDI driver that is compatible with your graphics card or get one from your graphics card manufacturer.

----------

See this link:

http://support02.autodesk.com/knowledgebase/html/400607.htm

(REMOVE SPACES from the pasted URL.)
----------

Also this one: (Do a word search for "fatal" and there are many additional links.)

http://support02.autodesk.com/knowledgebase/html/400607.htm

---------

Good luck,

Maxwell

by christieacan

All service packs installed...error only occurs when opening this particular file and trying to print it will crash the pc

This discussion is closed to new replies.