Discussion Locked

NT workstation

0 helpful
21 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can I use an NT workstation to administer an NT domain? Create new users, change passwords, stop services on the NT PDC of the network?

21 replies

by kellyst

Yes, but you need to copy the tools from an NT server or off the i386\client\srvtools directory off the NT server CD and re-apply the service pack

by orixrdw

Yes -first you need to map a drive to the boot drive of your pdc ie: (\\servername\c$).
Then you can create shortcuts to user manager and server manager, or any other administrative task. They are located in the system32 sub-directory.
(Server manager=srvmgr.exe)
(User Manager=usrmgr.exe) Hope this helps...

by ellisd

Yes you can. One way is through RAS, Remote Access Service and Admiministrator Privilages Using a phone modem and dial up networking. Then using RAS admin tools to take care of your business.

The other is log onto a NT workstation with Administrator Privilages.

In both cases the workstation must be attached by network connections to the server you want to access. Hope this helps.

by ahanning

You must first setup the work station for remote admination. Then it like setting a the server. Good luck.

by joshua1

These tools are on the NT Resource Kit. Specifically, the Client-based Network tools (this CD contains tons of NT programs). With Server Manager for domains, you will be able to control services on all NT machines.

by markswhite

#2 is the easist except that you do not need to map a network drive. Just use a UNC path to make a shortcut to the tools on the server or just copy them to your x:\%systemroot%\sytem32 folder if you whant to run them locally.If you need the help files bring them along as well.

by markswhite

#2 is the easist except that you do not need to map a network drive. Just use a UNC path to make a shortcut to the tools on the server or just copy them to your x:\%systemroot%\sytem32 folder if you want to run them locally.If you need the help files bring them along as well.

by markswhite

#2 is the easiest, except that you do not need to map a network drive. Just use a UNC path to make a shortcut to the tools on the server or just copy them to your x:\%systemroot%\sytem32 folder if you want to run them locally. If you need the help files bring them along as well.

This discussion is closed to new replies.