Discussion Locked

nt workstation as print server

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have recently upgraded some Win 95 machines to Win NT 4.0 sp5 workstations. These machines are used as print servers for a 100 person firm. It seemed to work well for a couple weeks, then started giving errors such as "Cannot Open Port" or "to many concurrent logins". Each printer is accessed by 10-30 users. I think that the systems are not dropping connections once people print to them and therefore there aren't any available spots for new people to connect. Once a system is rebooted, it seems to work fine for a while. Is there anyway to automatically drop these connections or alleviate this problem? Thanks for the help!

12 replies

by dmull

You can only have 10 users connected to any NT workstation when you're using it as a print server. You need to upgrade to NT server to do what you're trying to do.

by bill cassada

I would also highly recommend moving to SP6a as SP5 has know printing issues. Your problem seems to be with too many concurrent connections. Are you using network printers (do they have a network connection) or are they connected via the LPT port on the workstation? If you have network printers, have the users print directly to the printer. Upgrading to server will only help if you have the seats (licensing issue) to support the users. Network printing is much cheaper.

by seadogs

These workstations have the printers connected to their LPT ports. Is there anyway to close the concurrent connection if that is what is happening? We also started looking at the print server boxes. I believe you connect the printer to them and then they give an IP address so you can run them off a print server. Any recommendations or warnings on these? Thanks again

by gregpip

Sharing a printer from a NT workstation only works when a handfull of users. I agree with dmull. A NT server is a good option to share a printer. Another option is to purchase a network print server such as an Axis print server (www.axis.com). There are print server that are available from $100 and up. The Axis box is http enabled so it may be administered through a browser. Depending on the model you can share multiple printers on one device. These print servers will work with any printer.
Another option is when you get new printers is to buy printers the are network ready. We have Lexmark network printers, which are also http capable. For the cost of a $100 or so dollars you could save yourself hours of tech time. Hope this information helps.

by salexiev

Hello,
Windows NT Workstation has limitation of serving up to 10clients. When serving more clients (especially when the clients have the printers mapped) is possible to begin a lot of conflicts. You could try to use TCP/IP printing ? it could solvethe problem, or upgrade to NT Server, or of course bye specialized print server.

This discussion is closed to new replies.