Networks

Ask something
Discussion Locked

NT4 Client - Service Control Manager

0 helpful
5 replies

by simon.graham

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

I've just setup a machine to go onto our network.
Spec is as follows -

NT4 Workstation client (sp4)
Netware 6 client

Above machines has the following network services installed.

Computer Browser
NetBios Interface
Novell Client for NT
NDPS
Novell Workstation Manager
RPC Configuration
Server
Workstation

Protocols installed are -

TCP/IP
IPX/SPX
NetBIOS

Adaptor used is 3Com Etherlink 10/100 PCI NIC (3C905B-TX)

My problem is that when the PC is booted up, Windows generates a system error - listed in as two errors in Event Viewer. These are as follows.....

"The server service terminated with the following error: Not enough server storage is available to process this command."

"The Computer Browser service depends on the Server services which failed to start because of the following error: Not enough server storage is available to process this command."

Now, I can see all of the network with this PC - and it is appearing to operate properly.
Does this relate to actual server space, or is the term server used here a local setting?

Have to admit, I am confused! Any thoughts welcome.

Cheers,
Simon

5 replies

by gigelul

Hi,
This is a common problem after setup network properties. Reaply last service pack.
Good luck

by vinnyd

I have seen this before many times.

When ever you have to use the NT 4.0 cd to load something, you should always re-apply the nt service pack!

The server service needs the updated drivers from the service pack to work with the newer network drivers.

This discussion is closed to new replies.