Discussion Locked

NW5.1 Disk Duplexing

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've a NW5.1 Server with disk duplexing installed. I need to change the disks with vol sys to larger ones. My question: Is it possible to replace one of the mirrored/duplexed disks with one of the new larger ones. Then remirror and do so with the remaining old disk. I've read in the novell documentation that the new mirror partition has to be the same size than the original one. So I think that my "solution" is not the right way. Are there any other "simple" chances to change the disks? Maybe with third party products.

6 replies

by rbgnr111

to be able to mirror both netware partitions will need to be the same size, but if you were to add a new drive and move the data, then add the second new drive and remirror, to be able to extend the partition there is a product called server magic (www.powerquest.com) that can resize novell partitions.

by papachuck

AMEN to the first answer get a new drive and get Server Magic. Server Magic will save you a lot of time and headache....You can copy the SYS volume to the new drive. Then hide the old sys. Make sure the server runs like you like it. then add a second drive and mirror it to the new sys... Only then would I delete the original sys ( it is easier to unhide a volume with server magic that to reinstall a server....Good Luck... Chuck

by Member 23337380

Thanx.
I have not to hide one partiton. The first step is to remove one of the duplexed drives an keep it up for security reasons. Then I will duplex to the new larger one and use server magic to resize.

by kaltwasserwr

I have to agree with the first 2 answers, but there are a couple of alternatives that may (or may not) be better in your situation. Please not that both of the alternatives I offer will require your server to be able to support the addition of 2 drives as opposed to just swapping drives.

The first option is to span disks (add 2 additional drives, create new NW partitions, mirror them and then span the SYS volume to the new mirrored (or duplexed) partitions. This has one drawback and that is you have upped the statistical odds of a failure affesting your SYS volume (you now have 4 devices that can fail), however with duplexed drives this is not as critical as a single drive can still be replaced and the mirrors rebuilt. The advantage of this option is saving the expense of Server Magic (though I swear by this product there are times where the customer cannot justify the price), as well as the fact that this has never failed to work for me.

The second alternative is to look at what or who is using spa

by Member 23337380

Thanx.
That would be a fine option with the next server upgrade. But I have not the place to put the new drives in too. I need the place for additional fans for the new 10k rpm drives.

This discussion is closed to new replies.