Question Locked

One user Can't make on my 3CX phone system?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi All;

Please help me,Am currently using the 3CX system for about +/- 50 users but there is only one user who cannot receive calls but she can make outgoinf calls,

Your response will much appriciated

2 replies

by logikanet

Inbound issues are normally caused by firewall/NAT restrictions on a specific local network, in this case, it's possible this one user has a router which is preventing the incoming calls to reach his phone properly. You could ask him to configure his router to forward ports 5060 - 5200 UDP and 10000 - 20000 UDP to his Adapter/softphone/Ip-phone IP address. Even though some routers are compatible with SIP and will not block the standard SIP ports, most routers will block these ports by default unless you port-forward them to a specific location ( Your VoIP device ), you may also use DMZ so it opens all ports to a specific IP address (DO NOT enable this on a computer's IP address unless you know exactly what you're doing!).
Other issues such as codec conflicts should not be discarded, note that codec G.729 is not enabled by default on most softphones/mobile applications, calls without this codec may exhibit issues to include: fail answering supervision, dead-air, one-way-audio, echo, etc.

This discussion is closed to new replies.