Discussion Locked

OOPS Forgotten Administrator Password on

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a friend who upgraded windows 98 to NT 4 and then forgot the password. Does anyone have a suggestion as to how to get around this bad situation?

10 replies

by sparent

I haven't tried this but was told the following.

Do a full NT installation until you get to the point of where it asks you for the Administrator password. Once that's completed, you get out of the installation.

Since this sounds like a potentially hazardous thing to do, I double-check that first.

Have you tried MS' web site on this?

by mabridges61

...unless you have administrator "rights" on the computer, you can't begin any type of installation. And, since the user cannot log in as the Administrator, it's looking rather hopeless at this point.

I've looked on the MS website and searchedfor topics relating to the problem, but I haven't found a thing to help. Maybe I'm not looking in the right place.

by sparent

You have to do an NT install from 'outside NT', as if it never was there. You have to boot up with your floppy and/or CD.

I read this hint in an NT4 power user book but I can't, for the life of me, remember which one! (Perhaps, you might want to 'browse' at your nearest computer book store!)

by tonyp_fno

If you don't have a lot of programs installed then just rebuild the machine. However a fresh install might just kill everything on the hard drive partition where you are installing the new version of NT. However, if you don't want to go through all that try no password as possibly they didn't use any password. Also because NT passwords are case sensitive try all their regular passwords in small case, all caps, and title case. It that fails you are pretty much out of luck. Hopefully you have log in where you can at least back-up your data before rebuilding the OS.

by skkzarg_death

There is an easy way to fix this. It is with a Linux Offline Admin Pass Disk, which can be found at http://home.eunet.no/~pnordahl/ntpasswd

I am a MS guy, but having that bootdisk has saved me a couple of times. And no... I don't fear the penguin!

If ya need any more help feel free to email me and I will assist as possible.

Skkzarg

by mabridges61

Have you tried using this floppy procedure on a machine yourself? I looked at the documentation and it looks somewhat risky.

by salmonslayer

I've used the Linux boot disk solution (but didn't answer since I really couldn't remember where I got it from!). It has worked quite effectively during my tests on test beds, and could be a dangerous tool in the wrong hands. Just goes to show that physical security is where it all starts as if a person can access your NT machine and boot up with this disk, you in deep ...

by jgasher

If the disk is FAT, there is an easy fix. Boot to a Windowsw 98 Boot Disk and navigate to WINNT\SYSTEM32. Rename the file "SAM." to SAM.BAK. Remove the floppy and restart the system. This will reset the accounts database on the machine to what it was during install, minus passwords. New accounts will need to be created, but if it is just NTWks, that won't take any time.

This discussion is closed to new replies.