Question Locked

Open port timeout

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
we have an application that opens large number of ports. Most of the open ports status is Time_Wait. I understand that Time_Wait means that the port is wating for 120 sec to drop. with very larg number of open ports or waiting to time out, the system is experaincing low resources. My question is does the port required fix time to drop? Is it possible to change this time to something smaller say 50 sec and How? is this application issues and/or windows issue?

4 replies

by hal 90000

Edited by moderator

Message was edited by: beth.blakely@...

by hal 9000

Depending on what the application is actually doing you may be able to set the time out to a lower figure but this depends on the application. If it requires that long to connect to something shortening the time limit down may prevent the connection from happening.

As to how you would do this I would first need to know what application is involved here and what you are doing with it.

Col

This discussion is closed to new replies.