7 replies
by roy penfold
by thechas
Do you want to reset or adjust your BIOS settings?
If you can't access BIOS setup I would ONLY reset the BIOS settings if I was having a BIOS related problem.
Remember, when you reset the BIOS, you get the default settings which may not be correct for all of your hardware.
You need to hit the BIOS setup key while the RAM is testing. Between the video card splash and when the BIOS starts enumerating devices.
Are you sure that F1 is the correct key for your PC?
Some BIOSes use the Delete key, others use the Esc key.
Check the support pages at Gateway for your specific model to verify which key is correct.
Chas
by thechas
Just a thought, are you using a USB keyboard on a PC with PS/2 ports?
If so, the BIOS may not be able to see the USB keyboard until after the POST and device enumeration is complete.
Hook up a PS/2 keyboard and you should be able to enter BIOS setup.
If there is an option for USB legacy support, you can enable that so that your USB keyboard will be able to access BIOS setup.
Chas
by gary56789
Are you sure it's F1 key for Bios? Some comps use DEL or ESC - just a suggestion
Or does your F1 key simply not work at all? Test it by pressing it when PC up and running - you should get HelpCentre.
by hal 9000
Unless it is a USB keyboard the F1 should work if that is the right key actually. The most commonly keys used are the DEL & F2 but a lot of the current crop of keyboards use the Function keys for more than one thing and have an extra key to toggle between actions for the Function keys this is a very common thing today.
Col
Hoop this is of any help for you or others. You can clear the settings using the commmand prompt.
Please visit the following url for more deails:
http://pubs.logicalexpressions.com/Pub0009/LPMArticle.asp?ID=156
Rachid
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending