Discussion Locked

P2P Win98 problem

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm helping a friend with computer problems. He has a peer to peer system hooked directly together with crossover cable. One system seems to have no problems, but the other other can't see any computer besides itself on the network. I've done everything I can think of, reinstalled protocols, set up netbeui, etc etc. Any suggestions? I'm mostly into other platforms so win98 is a bit of any icy area for me.
Thanx in advance.

3 replies

by petemcc

Share a folder, drive or create a share on the target computer & add a user with rights to access. map a drive from the problem machine (right click network neighborhood) \\servername\sharename. If you're running TCP/IP ping the target by name and IP address

by vila

You probably have problem with Master Browser service. I don't know why but I can tell you workaround. There is a file, called lmhosts.sam. Ii think i't either in %systemroot% or in %systemroot\system32
Rename it lmhosts and write inside the oposite machine in the both stations. The sintax is:
xxx.xxx.xxx.xxx oposite_machine_name

where xxx.xxx.xxx.xxx is the oposite machine IP address. Note that you must have at least two spaces between the machina IP and Machine name

by tech010

I've had a similar issue. Make sure NetBeui is installed on both PC's and that they are part of the same workgroup. Also check the NIC settings, you may have to manually set the speed on one of the NIC's to 10mbs. Let me know how you make out.

This discussion is closed to new replies.