Discussion Locked

partitioning a 20 gb-hdd-windows milleni

0 helpful
23 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i want to use a 20 gb-hdd(ata 133/7200(maxtor fireball 3) only for special photo purposes.
my msi k7266 pro has also raid.plsu amd athlon xp 1800, 256 mb-ddr. although i have a second identical drive, possibly using both for raid, i want to installwindows millenium on one and win2k on the second drive, using them separately(only one drive at the same time).
using both windows-version is necessary to test stability of special software. i received some good tips having a special bootfiles-onlypartition(c) and windows on d with win2k. i would better have windows me and the bootfiles together.
what about the swapfile?
do you have a genious idea have to partition? i will use the drive only for photo-purposes. i have two more p4 left whichwill later be powered with larger drives. these asus p4b266se-boards do also have raid. maybe i will use this option.

23 replies

by cg it

the Promise IDE RAID controller only allows RAID 0 and RAID 1. Mirroring and Striping. Windows 2000 had RAID 5 software RAID capabilities but again, RAID isn't setup for dual booting purposes rather for security by mirroring one drive to another or linking two drives together to form a Larger single drive.

If you are going to run a test bed system for User created programs and Windows compatibility, Dual booting is probably the best course to take. Either that or set up two computers.

I'm not aware of a BIOS that will allow you to hook up two drives to the IDE channels and only use one drive at a time [in essence disabling the drive in the BIOS]nor am I aware of a special Windows program that will allow you to do this. That's not to say it doesn't exist.

by cg it

It's quite possible someone has come up with a special software program that will effectively allow you to disable a drive for so that Windows won't use it, but I don't think it's available as general public software.

by europanorama

sorry i want partitioning one drive not using raid. didnt i explain clearly enough? thanks anyhow, any informations are welcome, i will always save them. this saved me a lot of times...

by europanorama

btw: although i have not in mind compairing the results of the two windows(winme and win2k) at the same time(i must just test winme one day and win2k the other day and so on) i have seen a german company offering a box which can-after a reboot- switch from one drive(system) to the other.

by europanorama

i will change the drives whenever i like. eighter by simply exchanging them(i have all my working computer opened) or inside the case with special drawer as you certainly know.

by opatzg9

I know I've seen disk managers at tigerdirect which have front panels to allow you to boot from up to 3 different drives and it just leaves the others unpowered. I'm not sure how bios handles that. If your systems have usb or firewire ports, usb/firewire drives could be used for data handling between machines quite nicely. Just some other ideas for you.

by europanorama

the original question is still unanswered: how should i partition my 20 gb-drive? machine is still running and ontrack diskmanager wants to know how to execute....

by cg it

how to partition your 20Gig drive? Simple enough to do. Create a C drive and D Drive make them active and bootable via Fdisk then install the operating systems on the seperate partitions. Ontrack should read the dual boot and provide you with the option to boot to the different O/S's. As far as physical structure of the partition, W2K should have a space of about 4 GB to work with [including ALL service packs, hotfixes, security updates and the like] W ME probably 2 GB [including all the updates available.] I would say that dividing it in half 10GB for W2K and 10 GB ME ought to do the trick. Leaves about 6 GB for W2K [enough free space for virtual memory and any programs you want to install] and about 8GB for W ME. Depending upon what your testing you can chose NTFS for W2K or use FAT32, for W ME it's FAT32 only.

by europanorama

sorry interrupting you again: i will install winme on drive 1 and win2k on drive 2 and not use them at the same time. no dual boot. i want a simple solution. partitioning one simgel 20 gb for winme first.

i only need to know the configuration(okplus necessary details). i know how to execute partitioning, sorry you could not know.

by thechas

Hi Michael,

You do not need to enable RAID to use the drives on the on-board extra controller.

You can use the full rated speed of the controller for the drives.

You need to check for W2K, but for Windows Me, you need to install Windows with the drive connected to the standard IDE controller, and then you can move the drive to the RAID controller, and install the driver.

I guess, that I would install Me on C:
Then, W2K on D:
Then, move both drives to the primary RAID controller.
You then set the BIOS to boot from either SCSI, or the on-board controller. (depends on the options they give you)

On a DUAL-Boot system, I would leave the virtual memory settings alone, and let Windows use the same drive as the OS is installed on.

Chas

by europanorama

sorry could be wise but not at the actual moment. i will use such small harddrives only because they were cheap. big enough for testing. i have two more board left, both with raid, i will use them later, these p4-boards, asus p4b266 se. with or without raid we will see. i will ask you which drives i should buy maybe wdc 8mb ones. they are affordable.

by cg it

Ok now I figured out what your real question is. As I said in the previous answer, you only need about 4 GB for W2K and about 2 GB for W ME. However simplest thing to do is just partition the whole drive for W2K and partition the the whole drive forthe second drive your installing W ME on.

by europanorama

no, i would loose a lot of time when defraging, speedisking. i aumha-org is a precise description why separating.

by europanorama

i think best would be closing this question and start all over again. i just want to partition my 20 gb-hdd without w2k and raid, just winme on the first channel. ok?

here are my suggestions, learnt from http://www.aumha.org. my pc is now running since 30 hours and ontrack-diskmanager wants to who how
to partition.
c: windows me, 2.5 gb
d: swap 0.5 mb
e: data 15 gb
f: programs, 1.5 gb
g: disposible temp files(recent etc) 0.5 gb
total 20 gb, some files must be relocated with tweak ui(pls tell me where i can get this tool)
for informations how i got this idea pls use search (partitioning) in http://www.aumha.org, a very precise board.
keeep in mind: i will setup a second identical harddrive and run it separately by disconnecting the winme-drive. i will use it for 3d-photo-purposes, testing a new software.
if you have a different opinion how to partition pls let us know.

by europanorama

i think best would be closing this question and start all over again. i just want to partition my 20 gb-hdd without w2k and raid, just winme on the first channel. ok?

here are my suggestions, learnt from http://www.aumha.org. my pc is now running since 30 hours and ontrack-diskmanager wants to who how
to partition.
c: windows me, 2.5 gb
d: swap 0.5 mb
e: data 15 gb
f: programs, 1.5 gb
g: disposible temp files(recent etc) 0.5 gb
total 20 gb, some files must be relocated with tweak ui(pls tell me where i can get this tool)
for informations how i got this idea pls use search (partitioning) in http://www.aumha.org, a very precise board.
keeep in mind: i will setup a second identical harddrive(win2k) and run it separately by disconnecting the winme-drive. i will use both for 3d-photo-purposes, testing a new software.
if you have a different opinion how to partition pls let us know.

by opatzg9

I do like the break out you gave above but you will be losing space with each partition so don't expectthe last drive to be so large, also 1 gig is a good swap file size, you should need no more but I would not guarantee that when working with images, how big of mega pixels are you headed toward? anyway my ercommendation would keep the 2.5 gig for system, 1 gig for swap, 8 gig for programs, and a couple 3-4 gig drives for holding the images while working on them, having staging drives for cd burning/dvd burning is a real godsend at times. Good Luck!

by europanorama

yes, i forgot burning. earlier i had also the idea of making extra-image-partitions.

i have the following in mind:
1. 20 gb for winme
c: winme, 2.5 gb
d: swap 1 gb
e: programs 8 gb (i do not have such big programs, couldnt i reduce this size?)
f: data-different partitions.
how about a special cd-sized-partition? 700mb for cd-images?
i have already used this. seem to be a good idea when cd have to be copied? if they are 650mb should i have both versions? 650 and 700mb?
does the sequence programs after swap-partition matter? or should it be data first after swap.
do i need tweak ui if programs will not be installed on same partition like system? or is this only needed when i change from system-partion to its own? if i need tweak ui, i have check microsoft-site. its not clear where and if i can use it for winme. they say one cannot use it(only from win98se-cd) for winme, below there is an update. no word to install win98s-version and make an update...would this be the solution? or is there an already full winme-version around? if i ever need tweak ui.

after reading these good tips my idea of loading both winme and w2k and use them seperately/independent from each other would be possible with my raid-board, right? setup each drive on standard ide-controller, then relocate one the the raid-controller, right? pls give precise instructions. if this is true, i will not have to disconnect them if i jump from winme to w2k. it would be not problem since i have my pcs open-laid outside case.

maybe i will start with winme and ghost the complete harddisk to the second one. in case of emergency i will be saved. later i will install win2k on a much larger(60 gb or80 gb or 120 gb(8mb ram)-drive or drives using raid. thanks a lot. these tips are the most important ones. maybe later i will try out the more complicated ones from aumha.org.

by europanorama

i have changed the default cluster size for partitions f,g,h to 32 kb since i will use them only for huge panoramic photo files.
i know what is the advantage when using small(4kb) clusters if there are files smaller than 4kb. if the cluster are bigger i will loose space.
but what is the advantage when my clusters are bigger than 4kb if i have only huge files?
@chas i have a new sensationel wobble-panorama of my aeropan-shot. check my website in a few days or send me mail with subject wobble-panorama. i will send you the file. it looks like the creep is moving back and forth,looking around it!

by europanorama

the actual settings fro 20 gb-hdd are:
c: winme 2.5 gb
d: swap 1 gb
e: programs 3 gb
f: data 5 gb
g: data 5 gb
h data 3.5 gb
clustersize: c,d,e, 4kb-default
f,g,h 32 kb

by europanorama

sorry for delay and confusion: i will try to make it simpler: keep in mind: i will use winme and w2k on separate not connected systems

c: bootfiles, swap 1 gb
d: 2.5 gb(winme)- 4gb w2k
e: programs remaining space
f: data remaining space

isit a good idea seperating bootfiles, swap?
if i gas a second drive i would relocate swap to this drive.

keep in mind: i have a 60 gb-drive left for actual win2k-setup. can i use the same partition size regarding bootfiles, swap, win2k? partitions c and d?

by europanorama

sorry for delay and confusion: i will try to make it simpler: keep in mind: i will use winme and w2k on separate not connected systems

c: bootfiles, swap 1 gb
d: 2.5 gb(winme)- 4gb w2k
e: programs remaining space
f: data remaining space

isit a good idea seperating bootfiles, swap?
if i had a second drive i would relocate swap to this drive.

keep in mind: i have a 60 gb-drive left for actual win2k-setup. can i use the same partition size regarding bootfiles, swap, win2k? partitions c and d?

This discussion is closed to new replies.