Question Locked

Password change -- Domain not available??

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I set up a Win2K Adv Ser w/ SP4. It has WINS & DNS running, but I'm allowing my router to allocate IP's via its own DHCP service. The DHCP is set w/ the server's WINS address, so all systems grabbing an IP automatically point to the server for WINS.

I am able to log onto the domain from an XP (SP3) system. It runs scripting to map network drives (personal, group shares, etc.), but when I press ctrl+alt+del to change the password, it displays the following error:

"The system cannot change your password now because the domain [XXXXXX] is not available."

I'm pretty sure the machine & user are getting authenticated on the domain when logging in, otherwise the login script wouldn't run (right?).

I don't know if this would be a server or workstation issue...but I am loathe to reimage the workstation because the original XP cd is scratched and won't load properly. And the only ghost image I have is for a different system w/ different hardware/software.

Any ideas?

Thanks,
~Jasper

12 replies

by jasper75

I'm not receiving an error that the account is disabled; I'm actually able to log into the account from the workstation and get all my drives mapped, etc. I get the error that the domain cannot be contacted.

I guess it's worth a try...but my xp install cd is quite scratched, so I don't know if I'll be able to install the tool "netdom.exe".

**Also, my 2k server is the PDC; there aren't any nt4.0 systems on the network.**

~Jasper

by shasca

Is the user account you are trying to change password for locked out?

by jasper75

I'm able to log onto the workstation with the user and get authenticated, scripts run, drives mapped, etc.

Thanks for looking!!
~Jasper

by wizard-09

Remove the machine from the domain and re add it again, then have the user reset the password worth a try. Also try and ping the domain from the machnie in question.

by jasper75

Thanks for your response. I've already tried removing/re-adding from/to the domain. As for pinging the domain, forgive me...but how do you do that? I thought you can only ping an actual host...like the server itself? I get a response w/ 0-lost packets when pinging either the server name or just its IP (which means the WINS is at least working). But connectivity to the server was never an issue as I'm able to map network drives to it from the workstation in question.

by ic-it

the Users account details?

In Active Directory User and Computers if you right click on the user object you should get an option to reset the password.

To check if the user can change their own password right click on the user and select Properties, go to the Account tab and in the Account Options there should be an option to Allow the user to change password.

by jasper75

I'm going to try and wipe active directory services from the server. I don't really have the capacity (hardware/software/KNOWLEDGE) to run it all efficiently/effectively and don't really need it anyways.

I have the need of the information on the server more than the need to learn the environment & troubleshoot when things aren't working right.

Thanks for all of your responses...but I'm giving up for now ;P
~Jasper

by jasper75

Well...sort of. The option is properly configured, but it may explain a little. When I set up Active Directory and configured the DNS server, I didn't use a fully qualified domain name (FQDN); I just used [domain] instead of [server].[domain].com/org/etc. Perhaps that is why the XP workstation cannot find the domain in order to change the password.

This discussion is closed to new replies.