Discussion Locked

Patch Cable Color Standard

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What is the patch cable color standard for servers, workstations, switches, hub, etc.?

7 replies

by Member 20548194

the color of the cable is not relavant it is however a good idea to use a different color for servers, workstations, patch cords, etc. just for ease of locating them. As long as they are all cat5 or better you shoulsd be fine

by mckaytech

There is no published standard of which I am aware but we have recently adopted a color convention to separate out the cables by type (crossover versus straight) and subnet or VLAN.

This makes it easy to spot situations where the wrong cable type has been used or in rapidly tracing down a particular circuit.

paul

by bruce

SColeman,
Your color choices are up to you, just stick to whatever you decide.

Note that Leviton's Cat5E Patch cables, which are excellent quality, are all grey except the connectors(boots) are the specified colors. This is less convenient if your closets are full, but the price difference between the Cat5E and Cat5 is not that great. Down the road when Gigabit Ethernet is cheaper and more common, you'll be glad that you went with the higher data rate Cat5E.

Check out the Leviton 25yeargaurantee on any certified end to end Leviton job.

Good Luck,

Bruce

This discussion is closed to new replies.