15 replies
by bfilmfan
Did you modify the jumper settings to change it to a slave drive?
There is a potential that the BIOS will see the hard disk, but it too has been fried.
by bfilmfan
by kdyates
Yes, jumpers were changed and double checked by another PC tech. BIOS in all 3 new PC's was checked and verified. I'm thinking the Hdd is fried as you say.
Thanks
by jamesrl
Maybe not.
I had a similar situation about 6 months ago, where I had set up all the jumpers correctly, but couldn't see the HD. Sometimes its just the partition information is corrupted, so it can't be mounted.
I downloaded a few utilities from the net, some could see the files, so I found a utility that could copy the files onto my primary disk. Sorry I don't remember which one I used, but some of the vendors like OnTrack have try before you buy. Like you I was close to taking it to a data recovery specialist, but I pulled an all nighter and managed to save it.
James
by kdyates
James, thanks for making me feel sane again. I never felt the drive was bad, it just fidn't act like it is totaled. I sure would like to know what you used to get to the data. anyone else have a clue???? I thought the partition info was the cause when Disk Manager showed the drive but no partitions. The only option that DM gave was to re-partition/format.
Thanks, I will keep looking for a utility to help recover.
Ken
by mail
If the drive spins then you can recover data. If not, you can still get your data back, but it's gonna' cost you a lot more.
If the drive spins when you slave it up on the working computer, can you see it in the Disk Manager (Control Panel/Computer Management/Disk Manager)? What does the Disk Manager say about the drive? Healthy?
Yes - but you still can't see it in Windows? Try restarting again with the drive attached.
Can you see it in DOS? Do you know someone who can copy in DOS?
I can't really tell you how to get Windows explorer to see the drive if disk manager sees it and it's healthy.
If you have to get outside help:
How critical is the data and how much are you ready to spend?
Not critical/not sensitive and can spend $50: take it to the technicians at Comp USA.
Critical/Sensitive: find a computer forensic specialist in your town, or ship it to one out of state. They can recover the data for a fee ranging from $300 - $900.
Computer forensics usually falls under the category of Electronic Discovery/Digital Discovery. Here's a link to a whole bunch of vendors.
http://www.sochaconsulting.com/vendors.php
If the drive is truly "fried" - i.e. won't spin, then you might consider the following company: http://www.drivesavers.com/. But recovery here is usually north of $2,000.
by mail
If the drive spins then you can recover data. If not, you can still get your data back, but it's gonna' cost you a lot more.
If the drive spins when you slave it up on the working computer, can you see it in the Disk Manager (Control Panel/Computer Management/Disk Manager)? What does the Disk Manager say about the drive? Healthy?
Yes - but you still can't see it in Windows? Try restarting again with the drive attached.
Can you see it in DOS? Do you know someone who can copy in DOS?
I can't really tell you how to get Windows explorer to see the drive if disk manager sees it and it's healthy.
If you have to get outside help:
How critical is the data and how much are you ready to spend?
Not critical/not sensitive and can spend $50: take it to the technicians at Comp USA.
Critical/Sensitive: find a computer forensic specialist in your town, or ship it to one out of state. They can recover the data for a fee ranging from $300 - $900.
Computer forensics usually falls under the category of Electronic Discovery/Digital Discovery. Here's a link to a whole bunch of vendors.
http://www.sochaconsulting.com/vendors.php
If the drive is truly "fried" - i.e. won't spin, then you might consider the following company: http://www.drivesavers.com/. But recovery here is usually north of $2,000.
by gary56789
Both the Emergency Boot CD http://ebcd.pcministry.com/ and the Ultimate Boot CD http://www.ultimatebootcd.com/ should be able to help.
By the way, why not first try to boot the disc in a good computer as master (with no slave drive attached). Also, try it in Safe Mode if that doesn't work.
by diskaus
I have also had a similar problem , if I remember correctly I think you have to have Administrator rights and also know the Administrator password for the old drive before you can access any data on the old drive ( this was in an XP machine)
Hope this helps
by hal 9000
Well there are a couple of options here particularly if you can not see any partition Info. This really depends on how important the data actually is.
The first thing you could try is buy another drive of the exact same Make & Model and change the circuit Board on the bottom that may bring it back to life with valid partitions or it may not it all depends on what happened to the M'Board. If the % V DC supply went way out then most likely the Partition Information has been lost.
If that is the case you have a couple of options the first would be to buy/beg/steal a copy of Ontrack professional and restore the deleted partitions but as this isn't a cheap piece of software it's going to cost you somewhere around 1K in US$. There is always XWays Davary or Win Hex if you are into Hex it is the better of the two and much faster but not for the armature but Davory is simple to use and work with but you'll first need to format the drive to exactly the way it was when working in the now dead computer. A trial version of both programs are available at
If you want to try Davory out the trial version will only recover the first 200 K of any file and it is much slower than anything else but also much cheaper so it all balances out in the long run.
Lets know if you want any more help.
Col
by hal 9000
Just a word of warning here with any Data recovery Program it is vital never to write to the drive that you are recovering the data from so you'll need a lot of room on a different drive to save any recovered data.
Now that you have first hand experience of the vital need of a DR Plan don't rely on a USB Drive as these are just as susceptible to damage as a fixed drive in a computer the best option is to use Tape of DVDR while I personally prefer Tape the DVD option is faster and a bit easier for people to work with but has the problem of violating security as if these disc's are lost or stolen your DATA is freely available to who ever gets their hands on them.
by kdyates
Thanks everyone who submitted very helpful advise. I have been using PCInspector File Recovery with some limited success. It seems that most of my data is badly corrupted. I have been able to retrieve some of it, but ,alas, it seems that what was recoverable was also backed up. Of the several utilities I have tried, PCInspector has been the most useful. REMEMBER BackUp Fully and OFTEN. From now own it will be once a week for me or more often if I am working on important stuff.
Thanks all, take care.
Ken
by kdyates
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending